############################## cpd2.conf ETL #################################
Global;!!fil;Project,ETL East Trout Lake

Global;SpinupTime,1:30	# Generic spinup time, 1:30

# Log file info
Disk;!StationID,ETL
Disk;LogDir,/aer/etl/log

################################ Instruments #################################

Instruments;S11;Startup,cpd2.neph
Instruments;S11;Port,/dev/ttyUSB0:9600E71
Instruments;S11;DisplayName,TSI Neph
Instruments;S11;IdentifierChar,N
Instruments;S11;!fil;name,S11
Instruments;S11;Tags,ref;neph
Instruments;S11;ZeroAt;56:18,1

Instruments;A11;Startup,cpd2.clap3w
Instruments;A11;Port,/dev/ttyUSB2:57600N81
Instruments;A11;DisplayName,CLAP 10.006
Instruments;A11;IdentifierChar,W
Instruments;A11;!fil;name,A11
Instruments;A11;!inst;SerialNum,10.006
Instruments;A11;!Area_m2;1,2.002E-5
Instruments;A11;!Area_m2;2,2.016E-5
Instruments;A11;!Area_m2;3,1.985E-5
Instruments;A11;!Area_m2;4,1.943E-5
Instruments;A11;!Area_m2;5,1.921E-5
Instruments;A11;!Area_m2;6,1.952E-5
Instruments;A11;!Area_m2;7,2.065E-5
Instruments;A11;!Area_m2;8,2.012E-5
Instruments;A11;!Cal;QHardware,-0.284472;0.294924;-0.049063;0.023054#2016-07-20/DV
Instruments;A11;!Cal;Q,0.996#2016-07-20/DV
Instruments;A11;Autodetect,BOTH

Instruments;N61;Startup,cpd2.cpc_3775
Instruments;N61;Port,/dev/ttyUSB1:115200N81
Instruments;N61;DisplayName,CPC TSI 3775
Instruments;N61;!inst;SerialNumber,70851078
Instruments;N61;IdentifierChar,C
Instruments;N61;!fil;name,N61
Instruments;N61;Tags,cncc
Instruments;N61;!Q_cnc_cc_s,5.008 #2016-7-21 DV

Instruments;N11;Startup,cpd2.grimm
Instruments;N11;Port,/dev/ttyUSB3:9600N81
Instruments;N11;DisplayName,Grimm OPC
Instruments;N11;!inst;SerialNum,1A115095
Instruments;N11;IdentifierChar,D
Instruments;N11;!fil;name,N11
Instruments;N11;Tags,cnca

##############################################################################
############################### Internal Params ##############################
##############################################################################

Global;RepeaterFS,/var/run/cpd	# Repeater filesytem goes here
Global;StateFile,etc/cpdstate	# State file, relative to $CPD2

Disk;BufferSize,0	# Disabled
Disk;MaxFileSize,0	# Disabled
Disk;MonitorFile,X

# Network info
Global;IP;Authorize;127.0.0.1,255.255.255.255		# Loopback
Global;IP;ListenAddress;127.0.0.1,DEFAULT		    # Loopback


##############################################################################
################################# Control ####################################
##############################################################################

# Logging
Control;Logging;Type,Logging
Control;Logging;RotateInterval,24:00:00	# 24 hours
Control;Logging;AvgInterval,1:00	# 1 minute
Control;Logging;MonitorInterval,15:00	# 15 minutes

# Contamination control
#Control;Contamination;Type,Contamination
Control;Contamination;SpinupTime,1:30		# 1:30 to spinup
Control;Contamination;FlushTime,31		# 31 seconds after contam
#Control;Contamination;Bypass,AnalyzerBypass	# Digital channel for bypass
#Control;Contamination;dP_NephImpactor;Chan,P11	# channel name
#Control;Contamination;dP_NephImpactor;Max,100	# Contam if > this
#Control;Contamination;Sector;CleanupTime,2:00	# 2 minutes
#Control;Contamination;Sector;WindSpeed;Chan,WS	# Channel name
#Control;Contamination;Sector;WindSpeed;Min,4	# m/s
#Control;Contamination;Sector;WindSpeed;CleanupTime,30	# seconds
#Control;Contamination;Sector;WindDirection;Chan;WD	# Channel name
#Control;Contamination;Sector;1,30;50		# Contam sector 1
#Control;Contamination;Sector;1,150;160		# Contam sector 2
#Control;Contamination;CNC;Samples,1800		# Samples to average over
#Control;Contamination;CNC;Tag,cncc		# Instrument tag
#Control;Contamination;CNC;Dirty,7000		# contam > this
#Control;Contamination;CNC;Clean,500		# !contam < this
#Control;Contamination;CNC;Risk,4.0		# Spikes contam if sample>avg*this
#Control;Contamination;CNC;StartupTime,2:00	# 2 min startup time
#Control;Contamination;CNC;FirstAvg,4:00	# 4 mins after startup
#Control;Contamination;CNC;CleanupTime,10	# 10 seconds

# Cutpoint schedule
Control;Cutpoints;Type,Cutpoints
#Control;Cutpoints;Chan;Impactor,AnalyzerImpactor # Digital channel
Control;Cutpoints;FlushTime,31			# 31 sec flush
Control;Cutpoints;Scanning,FALSE		# Enable
Control;Cutpoints;Cutpoint;Idle,FINE		# Default cut
Control;Cutpoints;Cutpoint;00:00,COARSE	# Time after the hour
Control;Cutpoints;Cutpoint;05:00,FINE
Control;Cutpoints;Cutpoint;15:00,COARSE
Control;Cutpoints;Cutpoint;15:00,FINE
Control;Cutpoints;Cutpoint;20:00,COARSE
Control;Cutpoints;Cutpoint;25:00,FINE
Control;Cutpoints;Cutpoint;30:00,COARSE
Control;Cutpoints;Cutpoint;35:00,FINE
Control;Cutpoints;Cutpoint;40:00,COARSE
Control;Cutpoints;Cutpoint;45:00,FINE
Control;Cutpoints;Cutpoint;50:00,COARSE
Control;Cutpoints;Cutpoint;55:00,FINE


# Display aggregator
Control;DA;Type,DisplayAggregator