;cpd.ini.thd - cpd.ini for new THD rack system, 090924/eja; tested in lab as SFC [Global] ;Full path to the cpd executable (based on CPD), used when restarting (or if it is PATH, just "cpd") CPDBin=/bin/cpd ;Full path to the state file (again $(CPD)this) CPDState=/etc/cpdstate ;Path to the binarys, must have the trailing / BaseBin=/bin/ ;Instruments to spawn, HEADING:binary ;Or pause:time ;First the instruments Instrument=BESTUPS:bestups Instrument=CNC1:cnserial Instrument=NEPH1:neph Instrument=UMAC1:umac Instrument=PSAP3:psap3 Instrument=LOVEPID1:lovepid Instrument=TSITMF1:tsitmf Instrument=TSITMF2:tsitmf ;Instrument=CNC2:cnserial ;Instrument=GPS:gps ;Instrument=WATLOW:watlow ;Instrument=NEPH2:neph ;Instrument=UMAC2:umac ;Instrument=AETHALOMETER:aethalometer ;Instrument=RAWDATA:rawdatarec ;CLAP can only be here if it is in serial mode ;Instrument=CLAP:clap ;Instrument=CLAP2:clap ;Now the controllers Instrument=pause:2.0 Instrument=LOVEPIDUMAC1:lovepidumac ;Must be here (after delay) if it is in analog mode (it uses the uMAC) ;Instrument=CLAP:clap Instrument=AEROSOL:aerosol ;Wait to let aerosol spawn (others use it) Instrument=pause:2.0 Instrument=HUMIDOGRAPH:humidograph ;Instrument=FILTER:filter ;Wait for others to spawn, aeromon reads from filter Instrument=pause:2.0 Instrument=AEROMON:aeromon ;Full path to the serial server, if null, looks in the instrument bin dir for sersrv, if it cant open the file as a full pathname, prepends the bin dir to it, or just sersrv if it's in PATH) SerSrvBin=/aer/prg/cpd/bin/sersrv ;List of headings that designate spanchecks Spancheck=SPANCHECK ;List of uMACs, HEADING:id (id is hundreds digit on analog channels) uMAC=UMAC1:0 ;uMAC=UMAC2:1 uMAC=LOVEPIDUMAC1:2 uMAC=TSITMF1:3 uMAC=TSITMF2:4 ;Heading that other instruments will open to get aerosol data Aerosol=AEROSOL ;Heading instruments open filter as (to bypass mainly) ;Filter=FILTER ;Heading that cpx will use to get aeromon data Aeromon=AEROMON ;Heading that cpx will use to get clap data Clap=PSAP3 ;Heading that cpx will use to get ups data Bestups=BESTUPS ;Heading that cpx will use to get gps data ;Gps=GPS ;Password for the client to use ;ClientPassword=cmdl [Disk] ;Place to create log files, must have the trailing / LogDir=/aer/sfc/log/ ;Monitor file to use (gets the log timestamp appended) MonitorFile=CPDMON ;Time to rotate the files, hh:mm format LogRotateInterval=24:00 ;Do log rotation on the day boundary, regardless LogRotateOnDay=TRUE ;Interval to flush files, in minutes FlushInterval=15 ;First field after the timestamp (when writing records) StationID=SFC ;Maximum file size (more causes an auto-switch); in KB MaxFileSize=1024 ;Default for unspcified logging or "GLOBAL" GlobalLogging=TRUE ;Interval to calculate averages GlobalAvgInterval=1:00 ;Default interval for logging, if not specified or set to GLOBAL, mm:ss GlobalLogInterval=15:00 [SPANCHECK] ;List of nephs to check Neph=NEPH1 ;Neph=NEPH2 ;Time to measure CO2 on spancheck, mm:ss SpanCO2Time=5:00 ;Air SpanAirTime=10:00 ;Time to flush with CO2 SpanCO2FlushTime=5:00 ;With air SpanAirFlushTime=3:00 ;Name for the clients to use ClientName=Spancheck [CNC1] ;Port description Port=/dev/ttyUSB8:9600E71 ;Printable name (used mainly for error printing) NiceName=CN3760-1 ;Used to create status strings by the client ShortName=C ;Type (3010, 3010Polled, 3703, Pulse) CNType=Pulse ;Are we logging? (initially, can be changed while running) IsLogging=GLOBAL ;Enable logging of averages in "LogBase" file ;Run_Averages=TRUE ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=CNC001 ;Prepend this to all log entries LogPrepend= ;Interval between log entries, in mm:ss, or GLOBAL (to use to default) LogInterval=GLOBAL ;Flow (cc/s) Q_cnc_cc_s=26.48; #446/081124/JAO; 27.21;#446/081116/jao [CNC2] ;Port description Port=/dev/ttyUSB15:9600E71 ;Printable name (used mainly for error printing) NiceName=CN3760#189 ;Used to create status strings by the client ShortName=D ;Type (3010, 3010Polled, 3703, Pulse) CNType=CHAN2 CNCFrom=CNC1; Heading to read from if "CHAN2" type ;Are we logging? (initially, can be changed while running) IsLogging=GLOBAL ;Enable logging of averages in "LogBase" file #Run_Averages=TRUE ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=CNC002 ;Prepend this to all log entries LogPrepend= ;Interval between log entries, in mm:ss, or GLOBAL (to use to default) LogInterval=GLOBAL ;Flow (cc/s) Q_cnc_cc_s=26.28;#189/081116/jao ;Reference Neph [NEPH1] ;Port description Port=/dev/ttyUSB0:9600E71 ;Printable name NiceName=TSI Neph-1 ;Used to create status strings by the client ShortName=N ;Are we logging? (initially, can be changed while running) IsLogging=GLOBAL ;Enable logging of averages in "LogBase" file ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=NEPH01 ;Prepend this to all log entries LogPrepend= ;Interval between log entries, in mm:ss, or GLOBAL (to use to default) LogInterval=GLOBAL ;Strings to send during init, after all defaults InitStr=L1 InitStr=B255 ;Values to set SMZ=1 STA=1 STB=61 STP=30600 STZ=300 SMB=1 SP=75 ;Set lamp wattage to this on server exit SPexit=75 ;Times to zero check on, seconds into the hour ZeroAt=3418 ;Wavelengths Lambda_Green=550.0 Lambda_Red=700.0 ;Run_Averages=TRUE ;Aerosol rack uMAC [PSAP3] ;Port description Port=/dev/ttyUSB4:9600N81 ;Printable name (used mainly for error printing) NiceName=PSAP-3W ;Used to create status strings by the client ShortName=R ;Are we logging? (initially, can be changed while running IsLogging=GLOBAL ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=PSAP3W ;Prepend this to all log entries LogPrepend= ;Number of points to smooth with SmoothTC=60 ; Threshold for detecting end of filter change Threshold_RSD=0.0005 ;Sample area in m^2 Area_m2=1.964E-5; from [CLAP] S/N#107 030414/PJS ;Detect filter changes (START,STOP,BOTH,NONE) Autodetect=STOP ;Instrument calibrations Cal_Bap=0.0,1.0 Cal_Tr=0.0,1.0 ;cal_Q_slpm=0.064,0.991; from [CLAP] PSAP#107 051027/acm Cal_Q_slpm=0.0024,0.9648; 081124/JAO; -0.030,1.135,-0.0585; 071127/JAO ;Filter transmittance correction Cal_TRCB=0.814,1.237 Cal_TRCG=0.814,1.237 Cal_TRCR=0.814,1.237 ;Create la_ records Run_Averages=TRUE [UMAC1] ;Port description Port=/dev/ttyUSB6:9600N81 ;Printable name NiceName=uMAC-1 ;Used to create status strings by the client ShortName=U ;Are we logging? (initially, can be changed while running) IsLogging=GLOBAL ;Enable logging of averages in "LogBase" file #Run_Averages=TRUE ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=UMAC01 ;Address on uMAC chain Addr=0 ;Number of analog input channels to use CountAIch=24 ;Digital channels CountDch=2 ;Minium digital channel MinDch=0 ;Intial values for the analog out channels InitAO=0.0,3.0 ;Intial value for digital channels, hex, 2 digits per channel, accending channel order, left to right InitDO=0000 [AEROSOL] ;Show window initially DefaultShow=FALSE ;Printable name (used mainly for error printing) NiceName=Aerosol ;Used to create status strings by the client ShortName=A ;Are we logging? (initially, can be changed while running) IsLogging=GLOBAL ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=AEROSL ;Prepend this to all log entries LogPrepend= ;Interval between log entries, in mm:ss, or GLOBAL (to use to default) LogInterval=GLOBAL ;uMAC to use for digital out Dig_uMAC=0 ;DOT channel for the impactor Dig_Chan_AnalyzerImpactor=1 ;For the bypass Dig_Chan_Bypass=0 ;Reference neph to use, the heading RefNeph=NEPH1 ;Humidified neph ;WetNeph=NEPH2 ;CN counter to use CNC=CNC1 CNA=CNC2 CLAP=PSAP3 ;Seconds to pause averaging after a valve change SecondsToFlush=31 ;Seconds to pause averaging at startup SecondsToSpinup=90 ;Do averages when contaminated - disable if there is a filter system Average_On_Contam=TRUE ;Use linear out for cn out CN_Out_Lin=FALSE ;Channel on uMAC to output to, -1 disables CN_uMAC_Chan=-1 ;MFC voltage at STP MFC_Set_V=3.000 ;MFC output channel, -1 disables MFC_uMAC_Chan=-1 ;Default cut to use DefaultCut=COARSE ;Cutpoints, format is mm:ss(or just seconds), FINE/COARSE Cutpoint=00:00,COARSE Cutpoint=06:00,FINE Cutpoint=12:00,COARSE Cutpoint=18:00,FINE Cutpoint=24:00,COARSE Cutpoint=30:00,FINE Cutpoint=36:00,COARSE Cutpoint=42:00,FINE Cutpoint=48:00,COARSE Cutpoint=54:00,FINE ;uMAC channel assignments ;T&RH sensor pairs, -1 disables a channel ;Inlet sensor Chan_Inlet_T=9;same as sample Chan_Inlet_RH=201 ;Sample Chan_Sample_T=9;same as inlet Chan_Sample_RH=201 ;Rack Chan_Rack_T=-1 Chan_Rack_RH=-1 ;Stack Chan_Stack_T=8; Chan_Stack_RH=200 ;Pumpbox Chan_Pumpbox_T=13 Chan_Pumpbox_RH=-1 ;Heater Chan_Heater_T=-1 Chan_Heater_RH=-1 ;Humido preheater Chan_HumidoPreheat_T=-1 Chan_HumidoPreheat_RH=-1 ;Humido controller Chan_HumidoControl_T=-1 Chan_HumidoControl_RH=-1 ;Ambient - 20081119/JAO use Stack sensor Chan_Ambient_T=9 Chan_Ambient_RH=201 ;uMAC internal sensor Chan_uMAC_T=60 ;dP sensors Chan_dP_Pitot=19 Chan_dP_Purge=61 Chan_dP_NephImp=20 Chan_dP_Spare1=61 Chan_dP_Spare2=21 ;flowrate sensors Chan_Q_Filter=-1 Chan_Q_Analyzer=203 Chan_Q_Spare3=61 Chan_Q_Spare4=61 Chan_Q_Bypass=61 Chan_Q_CNDrier=400 Chan_Q_CN=300 ;General Chan_Wind_S=14 Chan_Wind_D=15 Chan_P_ambient=-1 ;Calibration info ;For T&RH sensors Cal_Inlet_T=-40.0,100.0; Cal_Stack_T=-40.0,100.0; Cal_Sample_T=-40.0,100.0; Cal_Inlet_RH=0.0,1.0; same as sample RH Cal_Stack_RH=0.0,1.0; Cal_Sample_RH=0.0,1.0; same as inlet RH Cal_Rack_T=-40.0,100.0; Cal_Rack_RH=0.0,1.0 Cal_Heater_T=0.0 Cal_Heater_RH=0.0 Cal_Ambient_T=-40.0,100.0; Cal_Ambient_RH=0.0,1.0 Cal_Pumpbox_T=-40.0,100.0; Cal_Pumpbox_RH=0.0,1.0 Cal_HumidoPreheat_T=9.9 Cal_HumidoPreheat_RH=9.9 Cal_HumidoControl_T=9.9 Cal_HumidoControl_RH=9.9 Cal_uMAC_T=0.0,1.0 Cal_RefInlet_T=-273.15,1.0;071127/JAO Cal_RefNeph_T=-273.15,1.0;071127/JAO Cal_RefNeph_RH=-0.000,1.0;071127/JAO Cal_WetInlet_T=-273.15,1.0 Cal_WetNeph_T=-273.15,1.0 Cal_WetNeph_RH=0.0,1.0 ;dP sensors Cal_dP_Pitot=-0.31,4.02; Cal_dP_Purge=0.0 Cal_dP_NephImp=-205.67,144.10;090930/eja; calib w/0-15 "h2o magnehelic Cal_dP_Spare1=0.0 Cal_dP_Spare2=-317.12,212.64;090930/eja; calib w/0-10 psi magnehelic ;Flowrate sensors Cal_Q_Filter=0.0,1.0 Cal_Q_Analyzer=0.164,1.00;091001/eja; Cal_Q_Spare3=30.0 Cal_Q_Spare4=30.0 Cal_Q_Bypass=30.0 Cal_Q_CNDrier=0.06,0.98;091001/eja;this is SLPM Cal_Q_CN=-0.05,1.02;091001/eja-this is SLPM ;General Cal_Wind_S=0.0,50.0 Cal_Wind_D=0.0,360.0 Cal_P_ambient=1013.0 [HUMIDOGRAPH] ;Show window initially DefaultShow=FALSE ;Printable name (used mainly for error printing) NiceName=Humidograph ;Used to create status strings by the client ShortName=H ;Are we logging? (initially, can be changed while running) IsLogging=GLOBAL ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=HUMGR1 ;Prepend this to all log entries LogPrepend= ;Interval between log entries, in mm:ss, or GLOBAL (to use to default) LogInterval=GLOBAL ;Watlow ;Watlow=WATLOW ;uMAC channel for the pump Pump_uMAC_ch=0 ;uMAC to use for digital out Dig_uMAC=0 ;uMAC Channel for pumprange PumpRange_uMAC_ch=3 ;If false, do not do any setpoints Scanning=FALSE ;Initial (and default) setpoint ;ChanA,ChanB,ChanC,ChanD SP_init=60.0, 100.0, 50.0, H ;Set this on exit SP_idle=0.0, 100.0, 0.0, L ;Setpoints ;Time (either seconds, or mm:ss, both after the hour),ChanA,ChanB,ChanC,ChanD Setpoint=3:00, 30.0, 0.0, 0.0, L;measure at lowest RH Setpoint=13:00, 30.0, 40.0, 50.0, H;prime the pump, start humidifying Setpoint=15:00, 30.0, 40.0, 15.0, L Setpoint=21:00, 30.0, 50.0, 15.0, L Setpoint=27:00, 30.0, 60.0, 15.0, L Setpoint=33:00, 30.0, 70.0, 15.0, L Setpoint=39:00, 30.0, 80.0, 15.0, L Setpoint=45:00, 30.0, 87.0, 15.0, L Setpoint=51:00, 30.0, 90.0, 15.0, L Setpoint=57:00, 30.0, 00.0, -20.0, H;drain humidifier, start neph zero check Setpoint=58:00, 30.0, 00.0, 0.0, L;let system dry out [AEROMON] ;Show window initially DefaultShow=FALSE ;Printable name (used mainly for error printing) NiceName=Aerosol Contamination ;Used to create status strings by the client ShortName=M ;Are we logging? (initially, can be changed while running) IsLogging=GLOBAL ;Gets "_yyyymmdd_hhmm" appended to it, and used as the log out file LogBase=AERMON ;Prepend this to all log entries LogPrepend= ;Interval between log entries, in mm:ss, or GLOBAL (to use to default) LogInterval=GLOBAL ;CN counter to use for contamination control CNC=CNC1 ;Filter, used to log its dP sensors ;Filter=FILTER ;Maximum dP across the Neph impactor, -1.0 disables Max_NephImp_dP=100.0 ;CNC contamination control ;CNC>this is always contaminated CNCC_Dirty=10000000.0 ;CNC