############################## cpd2.conf KPS #################################
Global;!!fil;Project,K-Puszta (Hungary)

Global;SpinupTime,1:30	# Generic spinup time, 1:30

# Log file info
Disk;!StationID,KPS
Disk;LogDir,/aer/kps/log

################################ Instruments #################################

Instruments;S11;Startup,cpd2.neph
Instruments;S11;Port,/dev/ttyUSB0:9600E71
Instruments;S11;DisplayName,TSI Neph
Instruments;S11;IdentifierChar,N
Instruments;S11;!fil;name,S11
Instruments;S11;Tags,ref;neph
Instruments;S11;Config;SMZ,4
Instruments;S11;Config;STA,1
Instruments;S11;Config;STP,30600
Instruments;S11;Config;STZ,300
Instruments;S11;Config;SMB,1
Instruments;S11;Config;SP,75
Instruments;S11;ZeroAt;56:18,1

#Instruments;A11;Startup,cpd2.psapG
#Instruments;A11;Port,/dev/ttyUSB2:9600N81
#Instruments;A11;DisplayName,PSAP-1W#0014 
#Instruments;A11;!inst;SerialNum,0014
#Instruments;A11;IdentifierChar,R
#Instruments;A11;!fil;name,A11
#Instruments;A11;Tags,psap
#Instruments;A11;Autodetect,STOP
#Instruments;A11;Area_m2,1.781E-5 #050228/PJS
#Instruments;A11;!Cal;Q,-0.0373;1.3173;-0.3589;0.1377 #050309/PJS
#Verify these
#Instruments;A11;!inst;config1,A=0.814;B=1.237;Area=17.81#20100401@JAO@GMD
#Instruments;A11;!inst;config2,0.0Lpm=1000;0.3Lpm=1240;2.0Lpm=2600#20100401@JAO@GMD

Instruments;A11;Startup,cpd2.clap3w
Instruments;A11;Port,/dev/ttyUSB1:57600N81
Instruments;A11;DisplayName,CLAP
Instruments;A11;IdentifierChar,L
Instruments;A11;!fil;name,A11
Instruments;A11;!inst;SerialNum,10.024
Instruments;A11;!Cal;QHardware,-0.46041;0.77134;-0.40186;0.08998#10.024#2014-07-23/EJA@GMD
Instruments;A11;!Cal;Q,1.012#10.024#2014-07-23/EJA@GMD
Instruments;A11;!Area_m2;1,2.006E-05
Instruments;A11;!Area_m2;2,2.012E-05
Instruments;A11;!Area_m2;3,2.022E-05
Instruments;A11;!Area_m2;4,2.011E-05
Instruments;A11;!Area_m2;5,1.992E-05
Instruments;A11;!Area_m2;6,1.998E-05
Instruments;A11;!Area_m2;7,2.008E-05
Instruments;A11;!Area_m2;8,1.995E-05
Instruments;A11;Autodetect,BOTH

Instruments;X1;Startup,cpd2.brooks0254
Instruments;X1;Port,/dev/ttyUSB3:9600N81
Instruments;X1;DisplayName,Dilution controller
Instruments;X1;IdentifierChar,P
Instruments;X1;!fil;name,X1
# Variables
Instruments;X1;!var;Q_Q11;chan,0
Instruments;X1;!var;Q_Q11;cal,0.0;1.0
Instruments;X1;!var;Q_Q11;FieldDesc,Sample flow
Instruments;X1;!var;Q_Q12;chan,1
Instruments;X1;!var;Q_Q12;cal,0.0;1.0
Instruments;X1;!var;Q_Q12;FieldDesc,Dilution flow

##############################################################################
############################### Internal Params ##############################
##############################################################################

Global;RepeaterFS,/var/run/cpd	# Repeater filesytem goes here
Global;StateFile,etc/cpdstate	# State file, relative to $CPD2

Disk;BufferSize,0	# Disabled
Disk;MaxFileSize,0	# Disabled
Disk;MonitorFile,X

# Network info
Global;IP;Authorize;127.0.0.1,255.255.255.255		# Loopback
Global;IP;ListenAddress;127.0.0.1,DEFAULT		    # Loopback


##############################################################################
################################# Control ####################################
##############################################################################

# Logging
Control;Logging;Type,Logging
Control;Logging;RotateInterval,24:00:00	# 24 hours
Control;Logging;AvgInterval,1:00	# 1 minute
Control;Logging;MonitorInterval,15:00	# 15 minutes

# Contamination control
#Control;Contamination;Type,Contamination
#Control;Contamination;SpinupTime,1:30		# 1:30 to spinup
#Control;Contamination;FlushTime,31		# 31 seconds after contam
#Control;Contamination;Bypass,AnalyzerBypass	# Digital channel for bypass
#Control;Contamination;dP_NephImpactor;Chan,P11	# channel name
#Control;Contamination;dP_NephImpactor;Max,100	# Contam if > this
#Control;Contamination;Sector;CleanupTime,2:00	# 2 minutes
#Control;Contamination;Sector;WindSpeed;Chan,WS	# Channel name
#Control;Contamination;Sector;WindSpeed;Min,4	# m/s
#Control;Contamination;Sector;WindSpeed;CleanupTime,30	# seconds
#Control;Contamination;Sector;WindDirection;Chan;WD	# Channel name
#Control;Contamination;Sector;1,30;50		# Contam sector 1
#Control;Contamination;Sector;1,150;160		# Contam sector 2
#Control;Contamination;CNC;Samples,1800		# Samples to average over
#Control;Contamination;CNC;Tag,cncc		# Instrument tag
#Control;Contamination;CNC;Dirty,7000		# contam > this
#Control;Contamination;CNC;Clean,500		# !contam < this
#Control;Contamination;CNC;Risk,4.0		# Spikes contam if sample>avg*this
#Control;Contamination;CNC;StartupTime,2:00	# 2 min startup time
#Control;Contamination;CNC;FirstAvg,4:00	# 4 mins after startup
#Control;Contamination;CNC;CleanupTime,10	# 10 seconds

# Cutpoint schedule
Control;Cutpoints;Type,Cutpoints
#Control;Cutpoints;Chan;Impactor,AnalyzerImpactor # Digital channel
Control;Cutpoints;FlushTime,31			# 31 sec flush
Control;Cutpoints;Scanning,FALSE		# Enable
Control;Cutpoints;Cutpoint,Idle,COARSE		# Default cut
#Control;Cutpoints;Cutpoint,00:00,COARSE	# Time after the hour
#Control;Cutpoints;Cutpoint,05:00,FINE
#Control;Cutpoints;Cutpoint,15:00,COARSE
#Control;Cutpoints;Cutpoint,15:00,FINE
#Control;Cutpoints;Cutpoint,20:00,COARSE
#Control;Cutpoints;Cutpoint,25:00,FINE
#Control;Cutpoints;Cutpoint,30:00,COARSE
#Control;Cutpoints;Cutpoint,35:00,FINE
#Control;Cutpoints;Cutpoint,40:00,COARSE
#Control;Cutpoints;Cutpoint,45:00,FINE
#Control;Cutpoints;Cutpoint,50:00,COARSE
#Control;Cutpoints;Cutpoint,55:00,FINE


# Display aggregator
Control;DA;Type,DisplayAggregator