############################## cpd2.conf BEO #################################
Global;!!fil;Project,Samoa

Global;SpinupTime,20

# Log file info
Disk;!StationID,SMO
Disk;LogDir,/aer/smo/log

################################ Instruments #################################

Instruments;N71;Startup,cpd2.cpc_3010
Instruments;N71;Port,/dev/ttyS0:9600E71
Instruments;N71;DisplayName,CPC TSI 3010 2047
Instruments;N71;!inst;SerialNumber,2047
Instruments;N71;IdentifierChar,C
Instruments;N71;!fil;name,N71
Instruments;N71;Tags,cncc
Instruments;N71;!Q_cnc_cc_s,13.33#150203/RK@SMO#14.00#141128/RK@SMO/840mLPM#16.17 #100210/PJS@SMO;16.20;10/21/08 rca;16.38;040223/PJS


##############################################################################
############################### Internal Params ##############################
##############################################################################

Global;RepeaterFS,/var/run/cpd	# Repeater filesytem goes here
Global;StateFile,etc/cpdstate	# State file, relative to $CPD2

Disk;BufferSize,0	# Disabled
Disk;MaxFileSize,0	# Disabled
Disk;MonitorFile,X

# Network info
Global;IP;Authorize;127.0.0.1,255.255.255.255		# Loopback
Global;IP;ListenAddress;127.0.0.1,DEFAULT		    # Loopback


##############################################################################
################################# Control ####################################
##############################################################################

# Logging
Control;Logging;Type,Logging
Control;Logging;RotateInterval,24:00:00	# 24 hours
Control;Logging;AvgInterval,1:00	# 1 minute
Control;Logging;MonitorInterval,15:00	# 15 minutes

# Contamination control
Control;Contamination;Type,Contamination
Control;Contamination;SpinupTime,0:10               # 0:10 to spinup
Control;Contamination;FlushTime,15                  # 31 seconds after contam
Control;Contamination;CNC;Samples,1800              # Samples to average over
Control;Contamination;CNC;Tag,cncc                  # Instrument tag
Control;Contamination;CNC;Dirty,100000              # contam > this
Control;Contamination;CNC;Clean,500                 # !contam < this
Control;Contamination;CNC;Risk,4.0                  # Spikes contam if sample>avg*this
Control;Contamination;CNC;StartupTime,0:10          # Don't start averaging for this long at start
Control;Contamination;CNC;FirstAvg,0:10             # Don't calculate for this long at start
Control;Contamination;CNC;CleanupTime,15            # 15 seconds

# Display aggregator
Control;DA;Type,DisplayAggregator