############################## cpd2.conf WHI #################################
Global;!!fil;Project,WHI Whistler Mountain

Global;SpinupTime,1:30

# Log file info
Disk;!StationID,WHI
Disk;LogDir,/aer/whi/log

################################ Instruments #################################

Instruments;S11;Startup,cpd2.neph
Instruments;S11;Port,/dev/be_I40300572-0_0:9600E71
Instruments;S11;DisplayName,TSI Neph
Instruments;S11;IdentifierChar,N
Instruments;S11;!fil;name,S11
Instruments;S11;Config;STB,122
Instruments;S11;Tags,ref;neph
Instruments;S11;ZeroAt;56:18,1

Instruments;A11;Startup,cpd2.clap3w
Instruments;A11;Port,/dev/be_I40300572-0_1:57600N81
Instruments;A11;DisplayName,CLAP 10.002
Instruments;A11;IdentifierChar,W
Instruments;A11;!fil;name,A11
Instruments;A11;!inst;SerialNum,10.002
#Instruments;A11;Tags,psap
Instruments;A11;!Cal;QHardware,-0.280310;0.242837;-0.0167866;0.0221216#10.002#2017-02-23/MW@WHI
Instruments;A11;!Cal;Q,0.9913#10.017#2016-12-7/DV@WHI
Instruments;A11;!Area_m2;1,2.041E-05#10.002_1
Instruments;A11;!Area_m2;2,2.077E-05#10.002_2
Instruments;A11;!Area_m2;3,2.102E-05#10.002_3
Instruments;A11;!Area_m2;4,2.079E-05#10.002_4
Instruments;A11;!Area_m2;5,2.041E-05#10.002_5
Instruments;A11;!Area_m2;6,2.056E-05#10.002_6
Instruments;A11;!Area_m2;7,2.064E-05#10.002_7
Instruments;A11;!Area_m2;8,2.052E-05#10.002_8
Instruments;A11;Autodetect,BOTH
Instruments;A11;Autodetect;Start;RSD,0.01

Instruments;N61;Startup,cpd2.cpc_3775
Instruments;N61;Port,/dev/be_I40300572-1_1:115200N81
Instruments;N61;DisplayName,CPC TSI 3775
#Instruments;N61;!inst;SerialNumber,184 # UNKNOWN
Instruments;N61;IdentifierChar,C
Instruments;N61;!fil;name,N61
Instruments;N61;Tags,cncc
Instruments;N61;!Q_cnc_cc_s,5.0 #20100628; changed flow cal from 16.28 to 5 cc/s;changed to 25 from 5, SS 20101014; changed to 5 from 25, SS 20101215;

##############################################################################
############################### Internal Params ##############################
##############################################################################

Global;RepeaterFS,/var/run/cpd	# Repeater filesytem goes here
Global;StateFile,etc/cpdstate	# State file, relative to $CPD2

Disk;BufferSize,0	# Disabled
Disk;MaxFileSize,0	# Disabled
Disk;MonitorFile,X

# Network info
Global;IP;Authorize;127.0.0.1,255.255.255.255		# Loopback
Global;IP;ListenAddress;127.0.0.1,DEFAULT		    # Loopback


##############################################################################
################################# Control ####################################
##############################################################################

# Logging
Control;Logging;Type,Logging
Control;Logging;RotateInterval,24:00:00	# 24 hours
Control;Logging;AvgInterval,1:00	# 1 minute
Control;Logging;MonitorInterval,15:00	# 15 minutes

# Contamination control
#Control;Contamination;Type,Contamination
Control;Contamination;SpinupTime,1:30		# 1:30 to spinup
Control;Contamination;FlushTime,31		# 31 seconds after contam
#Control;Contamination;Bypass,AnalyzerBypass	# Digital channel for bypass
#Control;Contamination;dP_NephImpactor;Chan,P11	# channel name
#Control;Contamination;dP_NephImpactor;Max,100	# Contam if > this
#Control;Contamination;Sector;CleanupTime,2:00	# 2 minutes
#Control;Contamination;Sector;WindSpeed;Chan,WS	# Channel name
#Control;Contamination;Sector;WindSpeed;Min,4	# m/s
#Control;Contamination;Sector;WindSpeed;CleanupTime,30	# seconds
#Control;Contamination;Sector;WindDirection;Chan;WD	# Channel name
#Control;Contamination;Sector;1,30;50		# Contam sector 1
#Control;Contamination;Sector;1,150;160		# Contam sector 2
#Control;Contamination;CNC;Samples,1800		# Samples to average over
#Control;Contamination;CNC;Tag,cncc		# Instrument tag
#Control;Contamination;CNC;Dirty,7000		# contam > this
#Control;Contamination;CNC;Clean,500		# !contam < this
#Control;Contamination;CNC;Risk,4.0		# Spikes contam if sample>avg*this
#Control;Contamination;CNC;StartupTime,2:00	# 2 min startup time
#Control;Contamination;CNC;FirstAvg,4:00	# 4 mins after startup
#Control;Contamination;CNC;CleanupTime,10	# 10 seconds

# Cutpoint schedule
Control;Cutpoints;Type,Cutpoints
#Control;Cutpoints;Chan;Impactor,AnalyzerImpactor # Digital channel
Control;Cutpoints;FlushTime,31			# 31 sec flush
Control;Cutpoints;Scanning,FALSE		# Enable
Control;Cutpoints;Cutpoint;Idle,FINE    # Default cut


# Display aggregator
Control;DA;Type,DisplayAggregator