############################## cpd2.conf ARN #################################
Global;!!fil;Project,ARN El Arenosillo (Spain)

Global;SpinupTime,1:30	# Generic spinup time, 1:30

# Log file info
Disk;!StationID,ARN
Disk;LogDir,/aer/arn/log

################################ Instruments #################################

Instruments;S11;Startup,cpd2.neph
Instruments;S11;Port,/dev/ttyUSB1:9600E71
Instruments;S11;DisplayName,TSI Neph
Instruments;S11;IdentifierChar,N
Instruments;S11;!fil;name,S11
Instruments;S11;Tags,ref;neph
Instruments;S11;Config;SMZ,4
Instruments;S11;Config;STA,1
Instruments;S11;Config;STP,30600
Instruments;S11;Config;STZ,300
Instruments;S11;Config;SMB,1
Instruments;S11;Config;SP,75
Instruments;S11;ZeroAt;56:18,1

Instruments;A11;Startup,cpd2.clap3w
Instruments;A11;Port,/dev/ttyUSB7:57600N81
Instruments;A11;DisplayName,CLAP
Instruments;A11;IdentifierChar,L
Instruments;A11;!fil;name,A11
Instruments;A11;Tags,psap
Instruments;A11;!inst;SerialNum,10.021
Instruments;A11;!Cal;QHardware,-0.18145;0.16594;-0.01863;0.02909#10.021#2012-03-29/PJS@GMD
Instruments;A11;!Cal;Q,0.998#10.021#2012-03-29/PJS@GMD
Instruments;A11;!Area_m2;1,1.992E-05#10.021_1
Instruments;A11;!Area_m2;2,1.981E-05#10.021_2
Instruments;A11;!Area_m2;3,1.989E-05#10.021_3
Instruments;A11;!Area_m2;4,1.979E-05#10.021_4
Instruments;A11;!Area_m2;5,1.983E-05#10.021_5
Instruments;A11;!Area_m2;6,1.981E-05#10.021_6
Instruments;A11;!Area_m2;7,1.972E-05#10.021_7
Instruments;A11;!Area_m2;8,1.962E-05#10.021_8
Instruments;A11;Autodetect,STOP
Instruments;A11;SpotAdvanceTr,0.5
Instruments;A11;SpotAdvanceTr;G,0.7
Instruments;A11;Smoothing;Stability;Max,90
Instruments;A11;Smoothing;Stability;Min,90
Instruments;A11;Autodetect;Start;RSD,0.01

Instruments;Q11;Startup,cpd2.tsitmf
Instruments;Q11;Port,/dev/ttyUSB2:38400N81
Instruments;Q11;DisplayName, Nephelometer flow
Instruments;Q11;IdentifierChar, R
Instruments;Q11;!fil;name,Q11
Instruments;Q11;!var;Q_Q11;Cal,0.0;1.0 # 20111201/TSI
Instruments;Q11;!var;Q_Q11;chan,Q
Instruments;Q11;!var;Q_Q11;FieldDesc, Nephelometer flow (lpm)

Instruments;Q12;Startup,cpd2.tsitmf
Instruments;Q12;Port,/dev/ttyUSB4:38400N81
Instruments;Q12;DisplayName, Dilution flow
Instruments;Q12;IdentifierChar, Y
Instruments;Q12;!fil;name,Q12
Instruments;Q12;!var;Q_Q12;Cal,0.0;1.0 # 20111201/TSI
Instruments;Q12;!var;Q_Q12;chan,Q
Instruments;Q12;!var;Q_Q12;FieldDesc, Dilution flow (lpm)

##############################################################################
############################### Internal Params ##############################
##############################################################################

Global;RepeaterFS,/var/run/cpd	# Repeater filesytem goes here
Global;StateFile,etc/cpdstate	# State file, relative to $CPD2

Disk;BufferSize,0	# Disabled
Disk;MaxFileSize,0	# Disabled
Disk;MonitorFile,X

# Network info
Global;IP;Authorize;127.0.0.1,255.255.255.255		# Loopback
Global;IP;ListenAddress;127.0.0.1,DEFAULT		    # Loopback


##############################################################################
################################# Control ####################################
##############################################################################

# Logging
Control;Logging;Type,Logging
Control;Logging;RotateInterval,24:00:00	# 24 hours
Control;Logging;AvgInterval,1:00	# 1 minute
Control;Logging;MonitorInterval,15:00	# 15 minutes

# Contamination control
#Control;Contamination;Type,Contamination
Control;Contamination;SpinupTime,1:30		# 1:30 to spinup
Control;Contamination;FlushTime,31		# 31 seconds after contam
#Control;Contamination;Bypass,AnalyzerBypass	# Digital channel for bypass
#Control;Contamination;dP_NephImpactor;Chan,P11	# channel name
#Control;Contamination;dP_NephImpactor;Max,100	# Contam if > this
#Control;Contamination;Sector;CleanupTime,2:00	# 2 minutes
#Control;Contamination;Sector;WindSpeed;Chan,WS	# Channel name
#Control;Contamination;Sector;WindSpeed;Min,4	# m/s
#Control;Contamination;Sector;WindSpeed;CleanupTime,30	# seconds
#Control;Contamination;Sector;WindDirection;Chan;WD	# Channel name
#Control;Contamination;Sector;1,30;50		# Contam sector 1
#Control;Contamination;Sector;1,150;160		# Contam sector 2
#Control;Contamination;CNC;Samples,1800		# Samples to average over
#Control;Contamination;CNC;Tag,cncc		# Instrument tag
#Control;Contamination;CNC;Dirty,7000		# contam > this
#Control;Contamination;CNC;Clean,500		# !contam < this
#Control;Contamination;CNC;Risk,4.0		# Spikes contam if sample>avg*this
#Control;Contamination;CNC;StartupTime,2:00	# 2 min startup time
#Control;Contamination;CNC;FirstAvg,4:00	# 4 mins after startup
#Control;Contamination;CNC;CleanupTime,10	# 10 seconds

# Cutpoint schedule
Control;Cutpoints;Type,Cutpoints
#Control;Cutpoints;Chan;Impactor,AnalyzerImpactor # Digital channel
Control;Cutpoints;FlushTime,31			# 31 sec flush
Control;Cutpoints;Scanning,TRUE		# Enable
Control;Cutpoints;Cutpoint;Idle,COARSE		# Default cut
Control;Cutpoints;Cutpoint;00:00,COARSE	# Time after the hour
Control;Cutpoints;Cutpoint;05:00,FINE
Control;Cutpoints;Cutpoint;10:00,COARSE
Control;Cutpoints;Cutpoint;15:00,FINE
Control;Cutpoints;Cutpoint;20:00,COARSE
Control;Cutpoints;Cutpoint;25:00,FINE
Control;Cutpoints;Cutpoint;30:00,COARSE
Control;Cutpoints;Cutpoint;35:00,FINE
Control;Cutpoints;Cutpoint;40:00,COARSE
Control;Cutpoints;Cutpoint;45:00,FINE
Control;Cutpoints;Cutpoint;50:00,COARSE
Control;Cutpoints;Cutpoint;55:00,FINE


# Display aggregator
Control;DA;Type,DisplayAggregator