############################## cpd2.conf BEO ################################# Global;!!fil;Project,BEO Moussala (Bulgaria) Global;SpinupTime,1:30 # Generic spinup time, 1:30 # Log file info Disk;!StationID,BEO Disk;LogDir,/aer/beo/log ################################ Instruments ################################# Instruments;S11;Startup,cpd2.neph Instruments;S11;Port,/dev/ttyS3:9600E71 Instruments;S11;DisplayName,TSI Neph Instruments;S11;IdentifierChar,N Instruments;S11;!fil;name,S11 Instruments;S11;Tags,ref;neph #Instruments;S11;Config;SMZ,4 Instruments;S11;Config;SMZ,1 # 20121019/JAO Instruments;S11;Config;STA,1 Instruments;S11;Config;STP,30600 Instruments;S11;Config;STZ,300 Instruments;S11;Config;SMB,1 Instruments;S11;Config;SP,75 Instruments;S11;ZeroAt;56:18,1 Instruments;A11;Startup,cpd2.clap3w Instruments;A11;Port,/dev/ttyS0:57600N81 Instruments;A11;DisplayName,CLAP 10.022 Instruments;A11;IdentifierChar,W Instruments;A11;!fil;name,A11 Instruments;A11;Tags,psap Instruments;A11;!inst;SerialNum,10.022 # Old setting for old filter with new device Instruments;A11;!Cal;QHardware,-0.20878;0.22500;-0.06086;0.03714#10.022#2012-03-28/PJS@GMD Instruments;A11;!Cal;Q,0.998#10.022#2012-03-28/PJS@GMD #--------------------------------------- # New setting for new filter with new device #Instruments;A11;!Cal;QHardware,-0.17277;0.17109;-0.03394;0.03137#10.022#2017-01-13/JAO@GMD #Instruments;A11;!Cal;Q,1.000#10.022#2017-01-13/JAO@GMD #----------------------------------------------------- Instruments;A11;!Area_m2;1,2.014E-05 Instruments;A11;!Area_m2;2,2.019E-05 Instruments;A11;!Area_m2;3,2.024E-05 Instruments;A11;!Area_m2;4,2.019E-05 Instruments;A11;!Area_m2;5,2.015E-05 Instruments;A11;!Area_m2;6,2.005E-05 Instruments;A11;!Area_m2;7,2.003E-05 Instruments;A11;!Area_m2;8,1.995E-05 Instruments;A11;Autodetect,BOTH Instruments;A11;SpotAdvanceTr,0.5 #20120612/JAO@BEO - copied from BND config Instruments;A11;SpotAdvanceTr;G,0.7 #20120612/JAO@BEO - copied from BND config Instruments;A11;Smoothing;Stability;Max,90 #20120612/JAO@BEO - copied from BND config Instruments;A11;Smoothing;Stability;Min,90 #20120612/JAO@BEO - copied from BND config Instruments;A11;Autodetect;Start;RSD,0.01 #20120612/JAO@BEO - copied from BND config NephExternalLogging;Startup,cpd2.neph_bufferlogger NephExternalLogging;BufferSize,60 NephExternalLogging;File,/var/run/external/neph.log NephExternalLogging;Tag;Neph,neph NephExternalLogging;MVCMode,SINGLEZERO CLAPExternalLogging;Startup,cpd2.clap_bufferlogger CLAPExternalLogging;BufferSize,60 CLAPExternalLogging;File,/var/run/external/clap.log CLAPExternalLogging;Tag;CLAP,psap CLAPExternalLogging;MVCMode,SINGLEZERO ############################################################################## ############################### Internal Params ############################## ############################################################################## Global;RepeaterFS,/var/run/cpd # Repeater filesytem goes here Global;StateFile,etc/cpdstate # State file, relative to $CPD2 Disk;BufferSize,0 # Disabled Disk;MaxFileSize,0 # Disabled Disk;MonitorFile,X # Network info Global;IP;Authorize;127.0.0.1,255.255.255.255 # Loopback Global;IP;ListenAddress;127.0.0.1,DEFAULT # Loopback ############################################################################## ################################# Control #################################### ############################################################################## # Logging Control;Logging;Type,Logging Control;Logging;RotateInterval,24:00:00 # 24 hours Control;Logging;AvgInterval,1:00 # 1 minute Control;Logging;MonitorInterval,15:00 # 15 minutes # Contamination control #Control;Contamination;Type,Contamination Control;Contamination;SpinupTime,1:30 # 1:30 to spinup Control;Contamination;FlushTime,31 # 31 seconds after contam #Control;Contamination;Bypass,AnalyzerBypass # Digital channel for bypass #Control;Contamination;dP_NephImpactor;Chan,P11 # channel name #Control;Contamination;dP_NephImpactor;Max,100 # Contam if > this #Control;Contamination;Sector;CleanupTime,2:00 # 2 minutes #Control;Contamination;Sector;WindSpeed;Chan,WS # Channel name #Control;Contamination;Sector;WindSpeed;Min,4 # m/s #Control;Contamination;Sector;WindSpeed;CleanupTime,30 # seconds #Control;Contamination;Sector;WindDirection;Chan;WD # Channel name #Control;Contamination;Sector;1,30;50 # Contam sector 1 #Control;Contamination;Sector;1,150;160 # Contam sector 2 #Control;Contamination;CNC;Samples,1800 # Samples to average over #Control;Contamination;CNC;Tag,cncc # Instrument tag #Control;Contamination;CNC;Dirty,7000 # contam > this #Control;Contamination;CNC;Clean,500 # !contam < this #Control;Contamination;CNC;Risk,4.0 # Spikes contam if sample>avg*this #Control;Contamination;CNC;StartupTime,2:00 # 2 min startup time #Control;Contamination;CNC;FirstAvg,4:00 # 4 mins after startup #Control;Contamination;CNC;CleanupTime,10 # 10 seconds # Cutpoint schedule #Control;Cutpoints;Type,Cutpoints Control;Cutpoints;Chan;Impactor,AnalyzerImpactor # Digital channel Control;Cutpoints;FlushTime,90 # 90 sec flush Control;Cutpoints;Scanning,TRUE # Enable Control;Cutpoints;Cutpoint,Idle,FINE # Default cut Control;Cutpoints;Cutpoint,00:00,COARSE # Time after the hour #Control;Cutpoints;Cutpoint,30:00,FINE # Display aggregator Control;DA;Type,DisplayAggregator Control;DA;N_Avg,60 # Aggregate over 60 avergages #Control;DA;Tag;CNCC,cncc # cncc data from here #Control;DA;Tag;CNCA,cnca # cnca #Control;DA;Tag;PSAP,psap # psap Control;DA;Tag;Neph,ref # neph #Control;DA;Tag;WindSpeed;Chan,WS #Control;DA;Tag;WindDirection;Chan;WD