###################### cpd2.conf Mt. Waliguan, China #########################
Global;!!fil;Project,Mt Waliguan China

Global;SpinupTime,90

# Log file info
Disk;!StationID,WLG
Disk;LogDir,/aer/wlg/log

################################ Instruments #################################

Instruments;X1;Startup,cpd2.umac
Instruments;X1;Port,/dev/ttyUSB6:9600N81
Instruments;X1;DisplayName,Aerosol Rack uMAC
Instruments;X1;IdentifierChar,U
Instruments;X1;!fil;name,X1
Instruments;X1;InitDO,0000
# Variables
Instruments;X1;!var;T_V51;chan,9
Instruments;X1;!var;T_V51;cal,-40.0;100.0
Instruments;X1;!var;T_V51;FieldDesc,Stack splitter temperature (C)
Instruments;X1;!var;T_V11;chan,11
Instruments;X1;!var;T_V11;cal,-40.0;100.0
Instruments;X1;!var;T_V11;FieldDesc,Impactor box inlet temperature (C)
Instruments;X1;!var;Pd_P01;chan,19
Instruments;X1;!var;Pd_P01;cal,0.3559;3.9909#20190621#0.3099;4.004#20180708#0.2262;3.8740#20150726#0.1534;3.8724#20140913#0.0718;3.7855#20121116sjy-0.04983;4.2688#20121115sjy-0.06994;4.3862#20110729 sjy
Instruments;X1;!var;Pd_P01;FieldDesc,Stack pitot tube dP (hPa)
Instruments;X1;!var;Pd_P11;chan,21
Instruments;X1;!var;Pd_P11;cal,-188.94;316.22#20190621#-194.213;320.5411#20180708#-191.826;320.5854#20150726#-182.618;315.9092#20121126#-200.402;323.2627#20121115sjy-186.25;318.81# 20110729/sjy
Instruments;X1;!var;Pd_P11;FieldDesc,Neph impactor dP (hPa)
Instruments;X1;!var;Pd_P12;chan,22
Instruments;X1;!var;Pd_P12;cal,-191.447;319.118#20190621#-193.906;320.7267#20180708#-198.473;320.8003#20150726#-182.04;315.0623#20121116#-189.184;318.3585#20121115sjy-187.85;320.36#20110729/sjy
Instruments;X1;!var;Pd_P12;FieldDesc,Pump vacuum (hPa)
# Digital outputs
Instruments;X1;DIO;AnalyzerImpactor;Chan,1
Instruments;X1;DIO;AnalyzerBypass;Chan,0

Instruments;X2;Startup,cpd2.lovepid
Instruments;X2;Port,/dev/ttyUSB5:9600N81
Instruments;X2;DisplayName,Aerosol Rack LovePID
Instruments;X2;IdentifierChar,P
Instruments;X2;!fil;name,X2
# Paramters
Instruments;X2;Controls,31;32;33;34
#Instruments;X2;31;SPInit,47.0
#Instruments;X2;32;SPInit,40
#Instruments;X2;33;SPInit,40
Instruments;X2;34;SPInit,17.92#20180708,sjy
Instruments;X2;34;ManualOutput,TRUE
# Variables
Instruments;X2;!var;U_V51;chan,31
Instruments;X2;!var;U_V51;cal,0.3488;1.0159#20150726#-0.14997;1.078#20110823sjy
Instruments;X2;!var;U_V51;FieldDesc,Stack splitter RH (percent)
Instruments;X2;!var;U_V11;chan,32
Instruments;X2;!var;U_V11;cal,1.0833;0.9934#20150226#-0.14997;1.078#20110823sjy
Instruments;X2;!var;U_V11;FieldDesc,Impactor box inlet RH
Instruments;X2;!var;Q_Q11;chan,34
Instruments;X2;!var;Q_Q11;cal,-0.4822;0.95857#20180708sjy#-0.27957;0.99528#20110729 sjy
Instruments;X2;!var;Q_Q11;FieldDesc,Analyzer flow (slpm)


Instruments;S11;Startup,cpd2.neph
Instruments;S11;Port,/dev/ttyUSB2:9600E71
Instruments;S11;DisplayName,TSI Neph
Instruments;S11;!inst;SerialNumber,70910238
Instruments;S11;IdentifierChar,N
Instruments;S11;!fil;name,S11
Instruments;S11;Tags,ref;neph
Instruments;S11;Config;STP,30600
Instruments;S11;Config;SMZ,4
Instruments;S11;ZeroAt;56:58,1
Instruments;S11;!var;U_S11;chan,U
Instruments;S11;!var;T_S11;chan,T
Instruments;S11;!var;Uu_S11;chan,Uu
Instruments;S11;!var;Tu_S11;chan,Tu


Instruments;N71;Startup,cpd2.cpc_3010
Instruments;N71;Port,/dev/ttyUSB1:9600E71
Instruments;N71;DisplayName,CPC TSI 3010
Instruments;N71;!inst;SerialNumber,70450193
Instruments;N71;IdentifierChar,C
Instruments;N71;!fil;name,N71
Instruments;N71;Tags,cncc
Instruments;N71;!Q_cnc_cc_s,16.41#20190620#16.63#20180708#20150726#20140913#16.25#20121115sjy16.65#20110729/sjy 16.10


Instruments;A11;Startup,cpd2.psap3
Instruments;A11;Port,/dev/ttyUSB3:9600N81
Instruments;A11;DisplayName,PSAP-3W 86
Instruments;A11;!fil;SerialNumber,86
Instruments;A11;IdentifierChar,L
Instruments;A11;!fil;name,A11
Instruments;A11;Tags,psap
Instruments;A11;Autodetect,STOP
Instruments;!A11;Area_m2,1.781E-5 # 050228/PJS
Instruments;!A11;Cal;Q,-0.0335;1.1035;-0.0688#20190620#-0.0278;1.0892;-0.0573#20140913#-0.0454;1.0492;-0.052#20121115sjy-0.0269;1.0513;-0.0529#20110729/sjy
Instruments;!A11;inst;config1,A=0.814;B=1.237;Area=17.81#20110824/sjy
Instruments;!A11;inst;config2,0.0Lpm=1000;0.3Lpm=1240;2.0Lpm=2600#20110824/sjy


#Instruments;A12;Startup,cpd2.clap3w
Instruments;A12;Port,/dev/ttyUSB8:57600N81
Instruments;A12;DisplayName,CLAP
Instruments;A12;IdentifierChar,W
Instruments;A12;!fil;name,A12
Instruments;A12;!inst;SerialNum,10.00X
Instruments;A12;!Area_m2;1,1.7814E-5
Instruments;A12;!Area_m2;2,1.7814E-5
Instruments;A12;!Area_m2;3,1.7814E-5
Instruments;A12;!Area_m2;4,1.7814E-5
Instruments;A12;!Area_m2;5,1.7814E-5
Instruments;A12;!Area_m2;6,1.7814E-5
Instruments;A12;!Area_m2;7,1.7814E-5
Instruments;A12;!Area_m2;8,1.7814E-5
#Instruments;A12;!Cal;Q,1.0
#Instruments;A11;!Cal;QHardware,-3.953;4.2639;-1.5336;0.2082
Instruments;A12;Autodetect,BOTH


#Instruments;UPS1;Startup,cpd2.bestups
Instruments;UPS1;Port,/dev/ttyUSB4:1200N81
Instruments;UPS1;DisplayName,BestUPS
Instruments;UPS1;IdentifierChar,B
Instruments;UPS1;!fil;name,UPS1

##############################################################################
############################### Internal Params ##############################
##############################################################################

Global;RepeaterFS,/var/run/cpd      # Repeater filesytem goes here
Global;StateFile,etc/cpdstate       # State file, relative to $CPD2

Disk;BufferSize,0       # Disabled
Disk;MaxFileSize,0      # Disabled
Disk;MonitorFile,X

# Network info
Global;IP;Authorize;127.0.0.1,255.255.255.255       # Loopback
Global;IP;ListenAddress;127.0.0.1,DEFAULT           # Loopback


##############################################################################
################################# Control ####################################
##############################################################################

# Logging
Control;Logging;Type,Logging
Control;Logging;RotateInterval,24:00:00 # 24 hours
Control;Logging;AvgInterval,1:00        # 1 minute
Control;Logging;MonitorInterval,15:00   # 15 minutes

# Contamination control
Control;Contamination;Type,Contamination
Control;Contamination;SpinupTime,1:30               # 1:30 to spinup
Control;Contamination;FlushTime,31                  # 31 seconds after contam
Control;Contamination;Bypass,AnalyzerBypass         # Digital channel for bypass
Control;Contamination;dP_NephImpactor;Chan,Pd_P11      # channel name
Control;Contamination;dP_NephImpactor;Max,100       # Contam if > this
#Control;Contamination;Sector;CleanupTime,2:00      # 2 minutes
#Control;Contamination;Sector;WindSpeed;Chan,WSRaw  # Channel name
#Control;Contamination;Sector;WindSpeed;Min,0       # m/s
#Control;Contamination;Sector;WindSpeed;CleanupTime,30 # seconds
#Control;Contamination;Sector;WindDirection;Chan;WDRaw # Channel name
#Control;Contamination;Sector;1,20;30               # Contam sector 1
Control;Contamination;CNC;Samples,1800              # Samples to average over
Control;Contamination;CNC;Tag,cncc                  # Instrument tag
Control;Contamination;CNC;Dirty,18000                # contam > this
Control;Contamination;CNC;Clean,500                 # !contam < this
Control;Contamination;CNC;Risk,2.5                  # Spikes contam if sample>avg*this
Control;Contamination;CNC;StartupTime,0:30          # Don't start averaging for this long at start
Control;Contamination;CNC;FirstAvg,0:30             # Don't calculate for this long at start
Control;Contamination;CNC;CleanupTime,60            # 60 seconds

# Cutpoint schedule
Control;Cutpoints;Type,Cutpoints
Control;Cutpoints;Chan;Impactor,AnalyzerImpactor # Digital channel
Control;Cutpoints;FlushTime,31
Control;Cutpoints;Scanning,TRUE# Change the valve 20180709 # Change 230V Valve/sjy/20121116  # 20110824/jo Disable, ball valve is broken
Control;Cutpoints;Cutpoint;Idle,COARSE      # Default cut
Control;Cutpoints;Cutpoint;00:00,COARSE     # Time after the hour
Control;Cutpoints;Cutpoint;06:00,FINE
Control;Cutpoints;Cutpoint;12:00,COARSE
Control;Cutpoints;Cutpoint;18:00,FINE
Control;Cutpoints;Cutpoint;24:00,COARSE
Control;Cutpoints;Cutpoint;30:00,FINE     #change from 32 to 30 #20121116
Control;Cutpoints;Cutpoint;36:00,COARSE
Control;Cutpoints;Cutpoint;42:00,FINE
Control;Cutpoints;Cutpoint;48:00,COARSE
Control;Cutpoints;Cutpoint;54:00,FINE

# Display aggregator
Control;DA;Type,DisplayAggregator



##############################################################################
#Contacts,In case of problems, please contact one of the following
#Contacts,     Name               Work            Home             Email
#Contacts,                                                         (@noaa.gov)
#Contacts,PRI  Pat Sheridan       +1(303)497-6672 +1(303)888-6602  Patrick.Sheridan
#Contacts,BAK  Betsy Andrews      +1(303)497-5171 +1(303)442-5142  Betsy.Andrews