!###############################################################################
!
! Put out information on model settings:
!  o regions
!
!### macro's ###################################################################
!
#define TRACEBACK write (gol,'("in ",a," (",a,", line",i5,")")') rname, __FILE__, __LINE__; call goErr
#define IF_NOTOK_RETURN(action) if (status/=0) then; TRACEBACK; action; return; end if
#define IF_ERROR_RETURN(action) if (status> 0) then; TRACEBACK; action; return; end if
!
#include "tm5.inc"
!
!###############################################################################

module User_Output_Settings

  use GO, only : gol, goPr, goErr

  implicit none
  
  
  ! --- in/out -----------------------------------

  private

  public :: User_Output_Settings_Init, User_Output_Settings_Done
  

  ! --- const ------------------------------------
    
  character(len=*), parameter  ::  mname = 'User_Output_Settings'
  

  ! --- var ------------------------------------
   
  ! base path:
  character(len=1024)     ::  settings_output_dir


contains


  ! ====================================================================
  
  
  subroutine User_Output_Settings_Init( rcF, status )

    use GO, only : TrcFile, ReadRc
    use GO, only : pathsep

!    use MDF, only : MDF_Init, MDF_Done
    
    use global_data, only : outdir
  
    ! --- in/out ---------------------------------
    
    type(TrcFile), intent(in)     ::  rcF
    integer, intent(out)          ::  status
    
    ! --- const ----------------------------------
    
    character(len=*), parameter ::  rname = mname//'/User_Output_Settings_Init'
    
    ! --- local ----------------------------------

    character(len=256)      :: subdir
    
    ! --- begin ----------------------------------

    ! read output subdirectory from settings:
    call ReadRc( rcF, 'settings.output.subdir', subdir, status, default='' )
    IF_ERROR_RETURN(status=1)
    ! base path:
    write (settings_output_dir,'(3a)') trim(outdir), pathsep, trim(subdir)

!    ! setup MDF interface to HDF/NetCDF :
!    call MDF_Init( status )
!    IF_NOTOK_RETURN(status=1)
    
    ! write file with region defintions:
    call User_Output_Settings_Regions( status )
    IF_NOTOK_RETURN(status=1)
    
!    ! done with MDF interface:
!    call MDF_Done( status )
!    IF_NOTOK_RETURN(status=1)
    
    ! ok
    status = 0

  end subroutine User_Output_Settings_Init
  
  
  ! ***
  
  
  subroutine User_Output_Settings_Done( status )
  
    ! --- in/out ---------------------------------
    
    integer, intent(out)          ::  status
    
    ! --- const ----------------------------------
    
    character(len=*), parameter ::  rname = mname//'/User_Output_Settings_Done'
    
    ! --- local ----------------------------------
    
    ! --- begin ----------------------------------
    
    ! nothing to be done ...
    
    ! ok
    status = 0

  end subroutine User_Output_Settings_Done
  
  
  ! ***
  
  
  subroutine User_Output_Settings_Regions( status )
  
    use GO       , only : pathsep
    use MDF      , only : MDF_Create, MDF_Close, MDF_EndDef
    use MDF      , only : MDF_NETCDF, MDF_REPLACE, MDF_GLOBAL, MDF_CHAR, MDF_INT, MDF_FLOAT
    use MDF      , only : MDF_Put_Att
    use MDF      , only : MDF_Def_Dim
    use MDF      , only : MDF_Def_Var, MDF_Put_Var
    use dims     , only : nregions
    use dims     , only : region_name
    use dims     , only : xbeg, xend, im
    use dims     , only : ybeg, yend, jm
    use dims     , only : parent
    use Partools , only : myid, root
    use MeteoData  , only : lli
    use RedgridZoom, only : nred, jred, clustsize
  
    ! --- in/out ---------------------------------
    
    integer, intent(out)          ::  status
    
    ! --- const ----------------------------------
    
    character(len=*), parameter ::  rname = mname//'/User_Output_Settings_Regions'

    ! --- local ----------------------------------
    
    character(len=1024)       ::  fname
    integer                   ::  hid
    integer                   ::  dimid_region, dimid_len_region_name
    integer                   ::  varid_region_name
    integer                   ::  varid_xbeg, varid_xend, varid_nx, varid_dx
    integer                   ::  varid_ybeg, varid_yend, varid_ny, varid_dy
    integer                   ::  varid_parent
    integer                   ::  dimid_lon, dimid_blon
    integer                   ::  dimid_lat, dimid_blat
    integer                   ::  varid_lon, varid_blon
    integer                   ::  varid_lat, varid_blat
    integer                   ::  varid_rg_clustsize
    
    integer                   ::  region
    integer                   ::  imr, jmr
    integer, allocatable      ::  rg_clustsize(:)
    integer                   ::  ired
    
    ! --- begin ----------------------------------
    
    ! root only ...
    if ( myid == root ) then
    
      ! * overview file

      ! compose filename:
      write (fname,'(a,a,"regions.nc")') trim(settings_output_dir), pathsep

      ! new file:
      call MDF_Create( trim(fname), MDF_NETCDF, MDF_REPLACE, hid, status )
      IF_NOTOK_RETURN(status=1)

      ! define dimensions:
      call MDF_Def_Dim( hid, 'region', nregions, dimid_region, status )
      IF_NOTOK_RETURN(status=1)

      call MDF_Def_Dim( hid, 'len_region_name', len(region_name(1)), dimid_len_region_name, status )
      IF_NOTOK_RETURN(status=1)

      ! variables:
      call MDF_Def_Var( hid, 'region_name', MDF_CHAR, (/dimid_len_region_name,dimid_region/), varid_region_name, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'xbeg', MDF_FLOAT, (/dimid_region/), varid_xbeg, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'xend', MDF_FLOAT, (/dimid_region/), varid_xend, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'ybeg', MDF_FLOAT, (/dimid_region/), varid_ybeg, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'yend', MDF_FLOAT, (/dimid_region/), varid_yend, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'nx', MDF_INT, (/dimid_region/), varid_nx, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'ny', MDF_INT, (/dimid_region/), varid_ny, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'dx', MDF_FLOAT, (/dimid_region/), varid_dx, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'dy', MDF_FLOAT, (/dimid_region/), varid_dy, status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Def_Var( hid, 'parent', MDF_INT, (/dimid_region/), varid_parent, status )
      IF_NOTOK_RETURN(status=1)

      ! finished definition:
      call MDF_EndDef( hid, status )
      IF_NOTOK_RETURN(status=1)

      ! fill:
      call MDF_Put_Var( hid, varid_region_name, region_name(1:nregions), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_xbeg, xbeg(1:nregions), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_xend, xend(1:nregions), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_ybeg, ybeg(1:nregions), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_yend, yend(1:nregions), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_nx, im(1:nregions), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_ny, jm(1:nregions), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_dx, (xend(1:nregions)-xbeg(1:nregions))/float(im(1:nregions)), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_dy, (yend(1:nregions)-ybeg(1:nregions))/float(jm(1:nregions)), status )
      IF_NOTOK_RETURN(status=1)
      call MDF_Put_Var( hid, varid_parent, parent(1:nregions), status )
      IF_NOTOK_RETURN(status=1)

      ! close file:
      call MDF_Close( hid, status )
      IF_NOTOK_RETURN(status=1)

      ! * region files

      ! loop over regions:
      do region = 1, nregions

        ! local dimensions:
        imr = im(region)
        jmr = jm(region)

        ! compose filename:
        write (fname,'(a,a,"region_",a,".nc")') trim(settings_output_dir), pathsep, trim(region_name(region))

        ! new file:
        call MDF_Create( trim(fname), MDF_NETCDF, MDF_REPLACE, hid, status )
        IF_NOTOK_RETURN(status=1)

        ! global attributes:
        call MDF_Put_Att( hid, MDF_GLOBAL, 'region_name', trim(region_name(region)), status )
        IF_NOTOK_RETURN(status=1)
        if ( parent(region) == 0 ) then
          call MDF_Put_Att( hid, MDF_GLOBAL, 'parent', 'globe', status )
          IF_NOTOK_RETURN(status=1)
        else
          call MDF_Put_Att( hid, MDF_GLOBAL, 'parent', trim(region_name(parent(region))), status )
          IF_NOTOK_RETURN(status=1)
        end if

        ! define dimensions:
        call MDF_Def_Dim( hid, 'lon' , imr  , dimid_lon , status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Def_Dim( hid, 'blon', imr+1, dimid_blon, status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Def_Dim( hid, 'lat' , jmr  , dimid_lat , status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Def_Dim( hid, 'blat', jmr+1, dimid_blat, status )
        IF_NOTOK_RETURN(status=1)

        ! grid variables:
        call MDF_Def_Var( hid, 'lon' , MDF_FLOAT, (/dimid_lon /), varid_lon , status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Def_Var( hid, 'blon', MDF_FLOAT, (/dimid_blon/), varid_blon, status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Def_Var( hid, 'lat' , MDF_FLOAT, (/dimid_lat /), varid_lat , status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Def_Var( hid, 'blat', MDF_FLOAT, (/dimid_blat/), varid_blat, status )
        IF_NOTOK_RETURN(status=1)
        ! reduced grid variables:
        call MDF_Def_Var( hid, 'rg_clustsize', MDF_INT, (/dimid_lat/), varid_rg_clustsize, status )
        IF_NOTOK_RETURN(status=1)

        ! finished definition:
        call MDF_EndDef( hid, status )
        IF_NOTOK_RETURN(status=1)

        ! write grid variables:
        call MDF_Put_Var( hid, varid_lon , lli(region)%lon_deg , status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Put_Var( hid, varid_blon, lli(region)%blon_deg, status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Put_Var( hid, varid_lat , lli(region)%lat_deg , status )
        IF_NOTOK_RETURN(status=1)
        call MDF_Put_Var( hid, varid_blat, lli(region)%blat_deg, status )
        IF_NOTOK_RETURN(status=1)

        ! write reduced grid clust size:
        allocate( rg_clustsize(jmr) )
        rg_clustsize = 1
        do ired = 1, nred(region)
          rg_clustsize(jred(ired,region)) = clustsize(ired,region)
        end do
        call MDF_Put_Var( hid, varid_rg_clustsize, rg_clustsize, status )
        IF_NOTOK_RETURN(status=1)
        deallocate( rg_clustsize )

        ! close file:
        call MDF_Close( hid, status )
        IF_NOTOK_RETURN(status=1)

      end do  ! regions
    
    end if  ! root only
    
    ! ok
    status = 0

  end subroutine User_Output_Settings_Regions
  

end module User_Output_Settings