'** This is the config file for (your prog name) prog **
'
' The rules are:
'       All non-data line need a comment at the start.
'       Blank lines are OK but are bad practice.
'       Data identifiers are in the form DATA=this_is_data.
'       Well, I suggest CAPS for the identifiers...you code whatever...
'       Data order is not important.
'       Comments after data are retained, indented and ignored.
'       Avoid formatting chars e.g.Tabs.
'       Data stored as strings, spaces allowed.
'
COMM=1                                  'comm port number
QHOURS= 469.96                          'quartz lamp hours
QNUMBER=9                               'quartz serial number
HGHOURS= 148.41                         'Mercury lamp hours
HGNUMBER=8                              'Mercury lamp serial number
QDATE=17-07-01                          'cal date for quartz lamp
PSUNUMBER=6                             'powersupply serial number
PSUDATE=21-11-03                        'cal date for PSU
RESNUMBER=6                             'resistor serial number
RESDATE=21-11-03                        'cal date for resistor
CLUNUMBER=8                             'Calibration Lamp Unit sn#
LOGFILENAME=uv3clu8log.txt              'name for log file
TempSens=lm35                           'determines what temp (lm35)
SMTP_Host=SMTP                          'name of SMTP host
InstrumentAddress=UV3@mlo.noaa.gov      'name of instrument (eMail address, needs an @ in it)
DestinationAddress=m.kotkamp@niwa.co.nz 'eMailaddress of destination
BoxTemp=20                              'desired Box temperature
ExtraTemps=extra                        'display extra chans (extra or no)
MailSlotChar=.                          'either * (everybody on domain)or . (just on PC) for Mailslot domain level
MailEnable=No                           'enable emails, Yes or No
AgilentNumber=6023                      'Use last 4 digits of Agilent serial   'comment for variable 21
'