The displays
variable in the CONFIGURATION
archive controls the graphical display of data.
In general this configuration is split by profiles to allow for multiple types of data display. For example, the main "aerosol" profile and another one for ozone plots. Within each profile there are multiple display modes, for example "raw" and "clean". These modes determine the visible plots and the default source of data.
This document contains the full list of possibilities for the configuration. In general, this is mostly a reference to be used with existing configurations. Using the graphical interface to create plots is generally the simplest option for most uses.
General Settings
- /ModeAlias
-
- Description
-
Alternate names for display modes
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /ModeAlias/
<IDENTIFIER>
-
- Description
-
The real mode name
- Type
- /ProfileAlias
-
- Description
-
Alternate names for profiles
- Keys
-
The keys immediately below this are profile names that are selected by the application. For example,
aerosol
is the commonly used default profile. However, any non-empty name is acceptable and can be used to create customized configurations that can be selected at run time. In general, profile names should be all lower case to preserve case insensitivity. In the paths listed<PROFILE>
is used as a placeholder to real profile name (e.g. replace<PROFILE>
withaerosol
for the default profile).
- /ProfileAlias/
<PROFILE>
-
- Description
-
The real profile name
- Type
- /Profiles
-
- Description
-
Display profile configuration
- Keys
-
The keys immediately below this are profile names that are selected by the application. For example,
aerosol
is the commonly used default profile. However, any non-empty name is acceptable and can be used to create customized configurations that can be selected at run time. In general, profile names should be all lower case to preserve case insensitivity. In the paths listed<PROFILE>
is used as a placeholder to real profile name (e.g. replace<PROFILE>
withaerosol
for the default profile).
- /Profiles/
<PROFILE>
-
- Description
-
Acquisition profile configuration
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Archive -
- Description
-
The default data archive
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays -
- Description
-
The displays (panes) shown in the user interface
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Type -
- Description
-
Enable evaluation type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Always
- A static condition that is always true -
AND
- Require all sub-matches to be true -
AtLeast
- Require a minimum number of unique sequence name matches -
AtLeastInstrument
- Require a minimum number of unique instrument code matches -
AtMost
- Require a maximum number of unique sequence name matches -
AtMostInstrument
- Require a maximum number of unique instrument code matches -
Never
- A static condition that is never true -
NOT
orInvert
- Invert the result of the sub match -
OR
- Require any sub-match to be true
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtLeast
-
- Description
-
The minimum number of unique sequence names to require
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Selection -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtLeast
-
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtMost
-
- Description
-
The maximum number of unique sequence names to allow
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Selection -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtMost
-
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtLeastInstrument
-
- Description
-
The minimum number of unique instrument suffixes require
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Selection -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtLeastInstrument
-
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtMostInstrument
-
- Description
-
The maximum number of instrument suffixes to allow
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Selection -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AtMostInstrument
-
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Components -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AND
-
- Description
-
The components to evaluate
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Components/#0
-
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = AND
-
- Keys
-
The keys below this one have an arbitrary structure. That is, the exact contents are not directly interpreted by the system so they are defined by conventions or subsequent usage.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Components -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = OR
-
- Description
-
The components to evaluate
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Components/#0
-
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = OR
-
- Keys
-
The keys below this one have an arbitrary structure. That is, the exact contents are not directly interpreted by the system so they are defined by conventions or subsequent usage.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Component -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Model = NOT
-
- Description
-
The component to invert
- Keys
-
The keys below this one have an arbitrary structure. That is, the exact contents are not directly interpreted by the system so they are defined by conventions or subsequent usage.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/All -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Type is absent
-
- Description
-
Only match if all elements match a sequence name
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/All/#0
-
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Type is absent
-
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Any -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Type is absent
-
- Description
-
Only match if at least one sequence name matches
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/None -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Enable/Type is absent
-
- Description
-
Only match if no sequence names match
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout -
- Description
-
A layout of display panes
- Keys
-
The keys immediately below this are unique numbers selected by the user. These keys are evaluated in sorted numeric order, with smaller numbers coming first. This is distinct from array notation in that it allows for skipped numbers and for partial overriding of a specific key only. In the paths listed
<NUMBER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/Height -
- Description
-
The height in logical rows of the pane
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/MinimumHeight -
- Description
-
The minimum height of the pane
- Type
- Valid range
-
1 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/MinimumWidth -
- Description
-
The minimum width of the pane
- Type
- Valid range
-
1 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/Stretch/X -
- Description
-
The horizontal stretch factors for each logical column in the pane width
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/Stretch/X/#0
-
- Description
-
Column stretch factor
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/Stretch/Y -
- Description
-
The vertical stretch factors for each logical row in the pane height
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/Stretch/Y/#0
-
- Description
-
Column stretch factor
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/Width -
- Description
-
The width in logical columns of the pane
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/X -
- Description
-
The logical X (horizontal) origin column of the pane
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Layout/Y -
- Description
-
The logical Y (vertical) origin row of the pane
- Type
- Valid range
-
0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type -
- Description
-
Pane display type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
TimeSeries
orTimeSeries2D
- A plot of a two dimensional strip chart style time series of data -
Cycle
orCycle2D
- A plot of a two dimensional cyclical visualization of data -
Scatter
,Graph2D
, orScatter2D
- A generic scatter or multidimensional binning plot -
Layout
- A recursive definition of another layout
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
-
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Layout
-
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/RemoveContamination -
- Description
-
Enable contamination removal by default
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/SortPriority -
- Description
-
The sort priority of the display, with smaller priority ones appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/WindowTitle -
- Description
-
The title displayed
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Acquisition -
- Description
-
Override settings for a realtime acquisition instrument interface, keyed by the instrument code
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Acquisition/<IDENTIFIER>
/MenuHide -
- Description
-
Do not display the menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions -
- Description
-
Predefined system actions
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Component/Name -
- Description
-
The component to execute as an action
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/ComponentPrompt -
- Description
-
Enable prompting for the component to use
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/DataPrompt -
- Description
-
Enable prompting for the selected data
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/End -
- Description
-
The end time to invoke the action with instead of the currently displayed time
- Type
- Units
-
s
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/End -
- Description
-
The end time to invoke the action with instead of the currently displayed time
- Structure
-
This is an absolute point in time specified as the number of seconds from the Unix epoch (1970-01-01T00:00:00Z).
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Hide -
- Description
-
Do not display the action
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Input -
- Description
-
Input used for the output processor
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Name -
- Description
-
The text of the action
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/NoTime -
- Description
-
Do not provide times to the input generator
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/OptionsPrompt -
- Description
-
Enable prompting for action options
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/SortPriority -
- Description
-
The sort priority of the action, with lower numbers appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Start -
- Description
-
The start time to invoke the action with instead of the currently displayed time
- Type
- Units
-
s
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Start -
- Description
-
The start time to invoke the action with instead of the currently displayed time
- Structure
-
This is an absolute point in time specified as the number of seconds from the Unix epoch (1970-01-01T00:00:00Z).
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Stations -
- Description
-
The station or stations to invoke the action with instead of the current one
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/Stations/#0
-
- Description
-
Input station used with the action
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/TimeDisable -
- Description
-
Allow times to be disabled when prompting
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/TimePrompt -
- Description
-
Enable prompting for the time range
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/TriggerReload -
- Description
-
Reload the main configuration after execution
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Actions/<IDENTIFIER>
/TriggerReplot -
- Description
-
Replot data after execution
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Aggregate -
- Description
-
Override settings for aggregate commands, keyed by the command name
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Aggregate/<IDENTIFIER>
/Hide -
- Description
-
Do not display the menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/DisableAdvanceShortcut -
- Description
-
Disable the next and previous keyboard shortcuts
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/DisableBackShortcut -
- Description
-
Disable the back keyboard shortcuts
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/DisableLegendToggleShortcut -
- Description
-
Disable the legend toggle keyboard shortcuts
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/DisableReplotShortcut -
- Description
-
Disable the replot keyboard shortcuts
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideAbout -
- Description
-
Hide the Help→About entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideAcquisitionConfiguration -
- Description
-
Hide the Edit→Acquisition Configuration menu entry, even in realtime mode
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideAcquisitionMenu -
- Description
-
Hide the acquisition menu entirely
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideAcquisitionRestart -
- Description
-
Hide the Acquisition→Restart menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideActionMenu -
- Description
-
Hide the Operations menu entirely
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideAutoprobeStatus -
- Description
-
Hide the Acquisition→Autoprobe menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideAveragingTime -
- Description
-
Hide the Acquisition→Averaging Time menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideBypass -
- Description
-
Hide the Acquisition→Bypass menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideContamination -
- Description
-
Hide the Acquisition→Contamination menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideDebug -
- Description
-
Hide the Help→Show Debug menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideDisplayMenu -
- Description
-
Hide the Display menu
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideDisplaySettings -
- Description
-
Hide the Edit→Display Settings menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideEventLog -
- Description
-
Hide the File→View Event Log menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideExportData -
- Description
-
Hide the File→Export Data menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideFullScreen -
- Description
-
Hide the File→Fullscreen menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideHelp -
- Description
-
Hide the Help menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideMentorEdits -
- Description
-
Hide the File→Mentor Edits menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideMessageLogEntry -
- Description
-
Hide the Acquisition→Message Log menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HidePreferences -
- Description
-
Hide the Edit→Preferences menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HidePrintDisplay -
- Description
-
Hide the File→Print menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideSaveDisplay -
- Description
-
Hide the File→Save Image menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideSystemConfiguration -
- Description
-
Hide the Edit→System Configuration menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideUserAction -
- Description
-
Hide the Operations→Manual menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewBack -
- Description
-
Hide the View→Back menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewData -
- Description
-
Hide the File→View Data menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewInitial -
- Description
-
Hide the View→Initial Times menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewLegends -
- Description
-
Hide the View→Legends toggle
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewMenu -
- Description
-
Hide the View menu entirely
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewNext -
- Description
-
Hide the View→Next menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewPrevious -
- Description
-
Hide the View→Previous menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewReplot -
- Description
-
Hide the View→Replot menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideViewResetAll -
- Description
-
Hide the View→Reset All menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/HideWebsite -
- Description
-
Hide the Help→Website menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Interface -
- Description
-
Override settings for an instrument interface command, keyed by the realtime instrument code
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Interface/<IDENTIFIER>
-
- Description
-
Override settings for a command, keyed by the the command name
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Menu/Interface/<IDENTIFIER>
/<IDENTIFIER>
/Hide -
- Description
-
Do not display the menu entry
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/PromptEBASFlagging -
- Description
-
Prompt for adding EBAS flaging when making mentor edits
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/Type -
- Description
-
Color model to use
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Local
- Connect with machine specific local socket -
Remote
,RemoteServer
, orTCP
- Connect over a TCP socket -
SSL
- Connect over a SSL/TLS encrypted TCP socket
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/Name -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/Type = Local
-
- Description
-
Socket name
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/Server -
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/Type = Local
-
- Description
-
Server host name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/ServerPort -
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/Type = Local
-
- Description
-
Server port number
- Type
- Valid range
-
1 ≤ value ≤ 65535
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/SSL -
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Realtime/Type = TCP
-
- Type
- Structure
-
A SSL specification consists of a hash map defining the parameters for encrypted SSL/TLS connections.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeHideStandard -
- Description
-
Hide the standard realtime windows even if none are explicitly defined
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows -
- Description
-
The realtime display windows
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/Commands -
- Description
-
Command data presented to the menu generation system
- Keys
-
The keys below this one have an arbitrary structure. That is, the exact contents are not directly interpreted by the system so they are defined by conventions or subsequent usage.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/MenuCharacter -
- Description
-
The selection hotkey
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/MenuEntry -
- Description
-
The entry in the menu
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/ShowOnUpdate -
- Description
-
Automatically show the window when matching data updates are detected
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/Window/Averaged -
- Description
-
Fixed averaging time data input
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/Window/Boxcar -
- Description
-
Moving average or boxcar data input
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/Window/Instant -
- Description
-
Instantaneous data input
- Type
- Structure
-
A sequence selection is a means of selecting a sequence of values in the data. The specification consists of selections for the various components of the sequence name.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/RealtimeWindows/<IDENTIFIER>
/WindowTitle -
- Description
-
The title displayed
- Type
- /Setup/Basic/NewUnderlay
-
- Description
-
The underlay path used when creating a new plot
- Type
Graph Common
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Highlight/Color -
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Highlight/DrawPriority -
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Inset/Bottom -
- Description
-
The additional reserved area outside the graph on the bottom
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Inset/Left -
- Description
-
The additional reserved area outside the graph on the left
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Inset/Right -
- Description
-
The additional reserved area outside the graph on the right
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Inset/Top -
- Description
-
The additional reserved area outside the graph on the top
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Box/DrawPriority -
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Box/Outline/Color -
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Box/Outline/Style -
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Box/Outline/Width -
- Description
-
The width of the line drawn around the legend box
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Box/Size -
- Description
-
The scale factor for how much extra space is created around the text inside the legend box
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Box/XInset -
- Description
-
The scale factor for how far the box is inset from the graph side in the X (horizontal) dimension
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Box/YInset -
- Description
-
The scale factor for how far the box is inset from the graph side in the Y (vertical) dimension
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Enable -
- Description
-
Enable drawing the graph legend
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Legend/Position -
- Description
-
Legend box position
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
TopLeft
,Inside
, orInsideTopLeft
- Display the legend inside the graph area near the top left corner -
TopRight
orInsideTopRight
- Display the legend inside the graph area near the top right corner -
BottomLeft
orInsideBottomLeft
- Display the legend inside the graph area near the bottom left corner -
BottomRight
orInsideBottomRight
- Display the legend inside the graph area near the bottom right corner -
Left
- Display the legend outside the graph on the left side -
Right
orOutside
- Display the legend outside the graph on the right side
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Color -
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/Family -
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/Flags -
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/LetterSpacing/Amount -
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/LetterSpacing/Type -
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/Size/Number -
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/Size/Type -
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/Stretch -
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/Weight -
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Font/WordSpacing -
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Title/Text -
- Description
-
The text displayed at the top of the graph
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators -
- Description
-
Indicators along the X axes
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Axis -
- Description
-
The identifier of the axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Color -
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Continuity -
- Description
-
The threshold to consider points contiguous
- Type
- Valid range
-
0.0 ≤ value
- Units
-
s
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/DrawPriority -
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Enable -
- Description
-
Enable display of the indicator
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Indicator/Inset -
- Description
-
The inset (distance from the axis edge) scaling factor of the indicator (negative for exact pixels)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Indicator/Size -
- Description
-
The size scaling factor of the indicator (negative for exact pixels)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Indicator/Type -
- Description
-
The type of symbol
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
- Automatically select an unused indicator type -
FilledRectangle
orRectangleFilled
- A solid colored rectangle near the axis -
FilledTriangle
,TriangleAwayFilled
, orTriangleFilled
- A solid colored triangle or isosceles trapezoid pointing away from the axis -
FilledTriangleTowards
orTriangleTowardsFilled
- A solid colored triangle or isosceles trapezoid pointing towards from the axis -
FilledDiamond
orDiamondFilled
- A solid colored diamond or hexagon with the top stretched near the axis -
Rectangle
- A rectangle output near the axis -
Triangle
orTriangleAway
- A triangle or isosceles trapezoid outline pointing away from the axis -
TriangleTowards
- A triangle or isosceles trapezoid outline pointing towards from the axis -
Diamond
- An outlined diamond or hexagon with the top stretched near the axis -
SpanningLine
- Lines at the start and end of the indicated region, spanning the whole graph -
AreaFill
,Area
, orFillArea
- A solid fill of the whole graph when the indicator is present
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Invert -
- Description
-
Invert the trigger (display when it is not met)
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/LatestOnly -
- Description
-
Only display the result of the latest trigger
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Legend/Text -
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Side -
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the indicator is displayed on -
Primary
,Bottom
, orLeft
- Locate the indicator on the "primary" side for its direction (on the left or bottom) -
Secondary
,Right
, orTop
- Locate the indicator on the "secondary" side for its direction (on the right or top)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Transformer -
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/TransformerMode -
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type -
- Description
-
Indicator trigger mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Flags
,Flag
,HasFlag
, orHasFlags
- Activate when a flag or flags are present -
LacksFlags
,LacksFlag
,NoFlag
, orNoFlags
- Activate when flags are absent -
AllFlags
orRequireFlags
- Activate when all flags are present -
MissingFlags
- Activate when all flags are absent -
Greater
,GreaterThan
, orMoreThan
- Activate when the value is greater than a threshold -
GreaterEqual
,AtLeast
, orGreaterThanOrEqualTo
- Activate when the value is greater than or equal to a threshold -
Less
,LessThan
, orSmaller
- Activate when the value isless than a threshold -
LessEqual
orLessThanOrEqualTo
- Activate when the value is less than or equal to a threshold -
Equal
,Exact
, orExactly
- Activate when the value is exactly equal to a target -
Difference
orDelta
- Activate when the input value changes by more than threshold amount -
DifferenceEqual
orDeltaEqual
- Activate when the input value changes by at least threshold amount -
Changed
orNotEqual
- Activate when the input changes at all -
NotChanged
- Activate when the input does not change -
AND
orBitwiseAND
- Activate when a bitwise AND of the value and a mask has a non-zero result (specific bits are set) -
XOR
orBitwiseXOR
- Activate when a bitwise XOR of the value and a mask has a non-zero result (specific bits are not set) -
Invalid
orEmpty
- Activate when the value is present but specifically invalid/empty -
Undefined
,NaN
, orUndef
- Activate when the value is present but invalid (MVC)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = Difference
-
- Description
-
The minimum amount the value must change by to activate the trigger
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = DifferenceEqual
-
- Description
-
The minimum amount the value must change by to activate the trigger
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = Flags
-
- Description
-
Flags that cause trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = AllFlags
-
- Description
-
Flags required for trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = LacksFlags
-
- Description
-
Flags whose absence causes trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = MissingFlags
-
- Description
-
Flags required to be absent for trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = Greater
-
- Description
-
The lower limit to activate above
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = GreaterEqual
-
- Description
-
The lower limit to activate above
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = Less
-
- Description
-
The upper limit to activate below
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XIndicators/<IDENTIFIER>
/Trigger/Type = LessEqual
-
- Description
-
The upper limit to activate below
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators -
- Description
-
Indicators along the Y axes
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Axis -
- Description
-
The identifier of the axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Color -
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Continuity -
- Description
-
The threshold to consider points contiguous
- Type
- Valid range
-
0.0 ≤ value
- Units
-
s
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/DrawPriority -
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Enable -
- Description
-
Enable display of the indicator
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Indicator/Inset -
- Description
-
The inset (distance from the axis edge) scaling factor of the indicator (negative for exact pixels)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Indicator/Size -
- Description
-
The size scaling factor of the indicator (negative for exact pixels)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Indicator/Type -
- Description
-
The type of symbol
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
- Automatically select an unused indicator type -
FilledRectangle
orRectangleFilled
- A solid colored rectangle near the axis -
FilledTriangle
,TriangleAwayFilled
, orTriangleFilled
- A solid colored triangle or isosceles trapezoid pointing away from the axis -
FilledTriangleTowards
orTriangleTowardsFilled
- A solid colored triangle or isosceles trapezoid pointing towards from the axis -
FilledDiamond
orDiamondFilled
- A solid colored diamond or hexagon with the top stretched near the axis -
Rectangle
- A rectangle output near the axis -
Triangle
orTriangleAway
- A triangle or isosceles trapezoid outline pointing away from the axis -
TriangleTowards
- A triangle or isosceles trapezoid outline pointing towards from the axis -
Diamond
- An outlined diamond or hexagon with the top stretched near the axis -
SpanningLine
- Lines at the start and end of the indicated region, spanning the whole graph -
AreaFill
,Area
, orFillArea
- A solid fill of the whole graph when the indicator is present
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Invert -
- Description
-
Invert the trigger (display when it is not met)
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/LatestOnly -
- Description
-
Only display the result of the latest trigger
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Legend/Text -
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Side -
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the indicator is displayed on -
Primary
,Bottom
, orLeft
- Locate the indicator on the "primary" side for its direction (on the left or bottom) -
Secondary
,Right
, orTop
- Locate the indicator on the "secondary" side for its direction (on the right or top)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Transformer -
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/TransformerMode -
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type -
- Description
-
Indicator trigger mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Flags
,Flag
,HasFlag
, orHasFlags
- Activate when a flag or flags are present -
LacksFlags
,LacksFlag
,NoFlag
, orNoFlags
- Activate when flags are absent -
AllFlags
orRequireFlags
- Activate when all flags are present -
MissingFlags
- Activate when all flags are absent -
Greater
,GreaterThan
, orMoreThan
- Activate when the value is greater than a threshold -
GreaterEqual
,AtLeast
, orGreaterThanOrEqualTo
- Activate when the value is greater than or equal to a threshold -
Less
,LessThan
, orSmaller
- Activate when the value isless than a threshold -
LessEqual
orLessThanOrEqualTo
- Activate when the value is less than or equal to a threshold -
Equal
,Exact
, orExactly
- Activate when the value is exactly equal to a target -
Difference
orDelta
- Activate when the input value changes by more than threshold amount -
DifferenceEqual
orDeltaEqual
- Activate when the input value changes by at least threshold amount -
Changed
orNotEqual
- Activate when the input changes at all -
NotChanged
- Activate when the input does not change -
AND
orBitwiseAND
- Activate when a bitwise AND of the value and a mask has a non-zero result (specific bits are set) -
XOR
orBitwiseXOR
- Activate when a bitwise XOR of the value and a mask has a non-zero result (specific bits are not set) -
Invalid
orEmpty
- Activate when the value is present but specifically invalid/empty -
Undefined
,NaN
, orUndef
- Activate when the value is present but invalid (MVC)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = Difference
-
- Description
-
The minimum amount the value must change by to activate the trigger
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = DifferenceEqual
-
- Description
-
The minimum amount the value must change by to activate the trigger
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = Flags
-
- Description
-
Flags that cause trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = AllFlags
-
- Description
-
Flags required for trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = LacksFlags
-
- Description
-
Flags whose absence causes trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = MissingFlags
-
- Description
-
Flags required to be absent for trigger activation
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = Greater
-
- Description
-
The lower limit to activate above
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = GreaterEqual
-
- Description
-
The lower limit to activate above
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = Less
-
- Description
-
The upper limit to activate below
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Threshold -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YIndicators/<IDENTIFIER>
/Trigger/Type = LessEqual
-
- Description
-
The upper limit to activate below
- Type
- Undefined values
-
Not permitted
Time Series
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/NeedleDrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority for realtime needle indicators
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The realtime data needles
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Axes/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the X axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Axes/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the Y axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Axes/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the Z (color) axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The background fill mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Scan
orModelScan
- Evaluate the model for every pixel -
Grid
,Bilinear
, orBilinearGrid
- Grid points and fill with the bilinear interpolation between them -
ShadeBottom
,Bottom
, orShadeToBottom
- Extend the trace coloring to shade to the bottom of the graph -
ShadeTop
,ShadeToTop
, orTop
- Extend the trace coloring to shade to the top of the graph -
ShadeLeft
,Left
, orShadeToLeft
- Extend the trace coloring to shade to the left of the graph -
ShadeRight
,Right
, orShadeToRight
- Extend the trace coloring to shade to the right of the graph -
FitShadeBottom
,FitBottom
, orFitShadeToBottom
- Extend the fit coloring to shade to the bottom of the graph -
FitShadeLeft
,FitLeft
, orFitShadeToLeft
- Extend the fit coloring to shade to the left of the graph -
FitShadeRight
,FitRight
, orFitShadeToRight
- Extend the fit coloring to shade to the right of the graph -
FitShadeTop
,FitShadeToTop
, orFitTop
- Extend the fit coloring to shade to the top of the graph
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Log/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the X axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Log/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Y axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Log/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Z (color) axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable the realtime needle
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Needle/Text/Format -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Value format string
- Type
- Undefined values
-
Trace metadata format
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Needles/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The traces in the plot
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the X axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the Y axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the Z (color) axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Continuity -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The threshold to consider points contiguous
- Type
- Valid range
-
0.0 ≤ value
- Units
-
s
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The background fill mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Scan
orModelScan
- Evaluate the model for every pixel -
Grid
,Bilinear
, orBilinearGrid
- Grid points and fill with the bilinear interpolation between them -
ShadeBottom
,Bottom
, orShadeToBottom
- Extend the trace coloring to shade to the bottom of the graph -
ShadeTop
,ShadeToTop
, orTop
- Extend the trace coloring to shade to the top of the graph -
ShadeLeft
,Left
, orShadeToLeft
- Extend the trace coloring to shade to the left of the graph -
ShadeRight
,Right
, orShadeToRight
- Extend the trace coloring to shade to the right of the graph -
FitShadeBottom
,FitBottom
, orFitShadeToBottom
- Extend the fit coloring to shade to the bottom of the graph -
FitShadeLeft
,FitLeft
, orFitShadeToLeft
- Extend the fit coloring to shade to the left of the graph -
FitShadeRight
,FitRight
, orFitShadeToRight
- Extend the fit coloring to shade to the right of the graph -
FitShadeTop
,FitShadeToTop
, orFitTop
- Extend the fit coloring to shade to the top of the graph
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the X axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Y axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Z (color) axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/DisableZ -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Disable the Z (color) axis during fitting
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the X axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the Y axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the Z (color) axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fitting mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
X
,IndependentX
, orXIndependent
- Use the X dimension as the independent values -
Y
,IndependentY
, orYIndependent
- Use the Y dimension as the independent values -
I
,IIndependent
, orIndependentI
- Use a virtual "I" dimension as the independent value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/MaxI -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode = I
-
- Description
-
The maximum of the I dimension
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/MinI -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode = I
-
- Description
-
The minimum of the I dimension
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable connecting line display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the connecting line
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable the realtime needle
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Needle/Text/Format -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Value format string
- Type
- Undefined values
-
Trace metadata format
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The origin of the points in the trace
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Start
- Draw points at the start time of the data value -
End
- Draw points at the end time of the data value -
Both
- Draw points at the start and end time of the data values -
Center
- Draw points at the central time of the data value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/SkipUndefined -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Skip undefined points, instead of breaking continuity
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Always display symbols at all points
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The scale factor of the symbol
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The size of the symbol
- Type
- Valid range
-
0.0 < value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The type of symbol
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
- Automatically select an unused symbol -
Circle
- A circle -
Square
- A square -
Diamond
- A diamond (45 degree rotated square) -
TriangleUp
orTriangle
- A triangle with a corner pointing upwards -
TriangleDown
- A triangle with a corner pointing downwards -
CircleCrossX
,CircleCross
, orCrossCircle
- A circle crossed with diagonal lines -
SquareCrossX
,CrossSquare
, orSquareCross
- A square crossed at the corners -
DiamondCrossPlus
,CrossDiamond
, orDiamondCross
- A diamond (45 degree rotated square) crossed at the corners -
TriangleUpCross
,CrossTriangle
,CrossTriangleUp
, orTriangleCross
- A triangle with a corner pointing upwards with crossing lines starting in each corner -
TriangleDownCross
orCrossTriangleDown
- A triangle with a corner pointing downwards with crossing lines starting in each corner -
CircleFilled
orFillCircle
- A circle with the entire area filled -
SquareFilled
orFillSquare
- A square with the entire area filled -
DiamondFilled
orFillDiamond
- A diamond (45 degree rotated square) with the entire area filled -
TriangleUpFilled
,filltriangle
,filltriangleup
, ortrianglefilled
- A triangle with a corner pointing upwards with the entire area filled -
TriangleDownFilled
orFillTriangleDown
- A triangle with a corner pointing downwards with the entire area filled -
X
orSimpleX
- Two diagonal crossing lines -
Plus
,+
, orSimplePlus
- Horizontal and vertical crossing lines -
CircleCrossPlus
orCrossCirclePlus
- A circle crossed with vertical lines -
DiamondCrossX
orCrossDiamondX
- A diamond (45 degree rotated square) crossed at the edges -
SquareCrossPlus
orCrossSquarePlus
- A square crossed at the edges -
TriangleLeft
- A triangle with a corner pointing left -
TriangleRight
- A triangle with a corner pointing right -
TriangleLeftCross
orCrossTriangleLeft
- A triangle with a corner pointing left with crossing lines starting in each corner -
TriangleRightCross
orCrossTriangleRight
- A triangle with a corner pointing right with crossing lines starting in each corner -
TriangleLeftFilled
orFillTriangleLeft
- A triangle with a corner pointing left with the entire area filled -
TriangleRightFilled
orFillTriangleRight
- A triangle with a corner pointing right with the entire area filled
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Bins with the binning definition along the X axis (vertically orientated box-whiskers)
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Axes/Dependent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the dependent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Axes/Independent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The identifier of the independent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Binning definitions by dimension index
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Bin definition type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Uniform
orFixedCount
- A fixed number of uniformly sized bins covering the whole time range -
FixedSize
orSize
- A dynamic number of bins, each with a fixed size in time -
Cluster
orClustering
- Generate bins for clusters of points -
Static
- Static and fixed bin definitions
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
Perform the binning after normalizing to logarithmic (base 10, if applicable) coordinates
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Uniform
-
- Description
-
The total number of bins
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = FixedSize
-
- Description
-
The width of each bin
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Cluster
-
- Description
-
The maximum distance between points to form a cluster
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The definitions of each bin
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/Center -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The center of the bin as displayed
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/End -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The end (upper) bound of the bin
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/Start -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The start (lower) bound of the bin
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Uniform
-
- Description
-
The total number of bins
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
-
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = FixedSize
-
- Description
-
The time each bin covers
- Type
- Structure
-
A time interval consists of a time unit, a number of units to apply, and an alignment setting.
- Undefined values
-
One hour
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = FixedSize
-
- Description
-
A logical time unit
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Millisecond
orMilliseconds
-
Second
,Sec
,Seconds
,Secs
, ors
-
Minute
,Min
,Mins
,Minutes
,m
, ormi
-
Hour
,Hours
, orh
-
Day
,Days
, ord
-
Week
,Weeks
, orw
-
Month
,Mon
,Mons
,Months
, ormo
-
Quarter
,Qtr
,Qtrs
,Quarters
, orq
-
Year
,Years
, ory
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = FixedSize
-
- Description
-
The number of units to apply in time
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Align -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = FixedSize
-
- Description
-
Align units in logical time
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable drawing the box outline
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Histogram -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Generate boxes in histogram mode (e.x. lower edge always at zero)
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The box edge quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.25
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Box outline line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/DrawBoxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable drawing any parts of the boxes
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fill/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fill/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable filling in the box
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable drawing the middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable drawing the graph spanning middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/QuantileMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Quantile calculation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Standard
orQuantiles
- Calculate component quantiles as fixed fractions -
Normal
,Mean
, orMeanSD
- Calculate quantiles as multiplies of the standard deviation away from the mean
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Relocation -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Relocate boxes that overlap with others
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/CapWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Cap width as a fraction of the box width
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable drawing the whisker lines
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The whisker quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.05
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Whisker line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Box width scaling type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Constant
- Constant sized based on the median effective bin size -
Scale
- Dynamically sized by scaling the effective bin size -
FixedExact
- Exact size, specified in pixels -
Fixed
- Exact size, specified in real units
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Constant
-
- Description
-
The scale factor applied to the median bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Scale
-
- Description
-
The scale factor applied to the bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Fixed
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = FixedExact
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Y (vertical) axis definitions with the key being used by the traces or binning for binding
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/AlwaysShow -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Always show the axis, even if it has no data attached
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of line of the axis main baseline
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Draw -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable axis display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The fixed graph spanning line definitions
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Position -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The position of the line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The grid line definitions, for each tick level
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable the grid level
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/GridEnable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable grid display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/GroupUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The logical grouping units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Absolute upper bound, the maximum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Required upper bound, the maximum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Upper bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the upper bound by a fraction of the total range -
Fixed
- Set the axis to a constant upper bound -
ExtendAbsolute
- Extend the upper bound by a fixed constant value -
PowerRound
- Extend the upper bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the upper bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = Fixed
-
- Description
-
The upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendAbsolute
-
- Description
-
The value added from the base upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Absolute lower bound, the minimum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Required lower bound, the minimum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Lower bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the lower bound by a fraction of the total range -
Fixed
- Set the axis to a constant lower bound -
ExtendAbsolute
- Extend the lower bound by a fixed constant value -
PowerRound
- Extend the lower bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the lower bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = Fixed
-
- Description
-
The lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendAbsolute
-
- Description
-
The value subtracted from the base lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Reverse -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Reverse the axis direction
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Side -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the axis is displayed on -
Primary
,Bottom
, orLeft
- Locate the axis on the "primary" side for its direction (on the left or bottom) -
Secondary
,Right
, orTop
- Locate the axis on the "secondary" side for its direction (on the right or top)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The sort priority of the axis, with lower priorities appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The settings for a level of ticks on the axis
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable tick label display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable tick display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/LineWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of line of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The size (distance from the baseline) of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Tick generation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Decimal
- Generate ticks based on logical decimal divisions -
Fixed
orConstant
- Generate ticks at fixed intervals around an origin -
CDF
orNormalCDF
- Generate ticks for normalized CDF standard deviation quantiles -
Allan
orTimeInterval
- Generate ticks at logarithmic logical time intervals for Allan plots -
Disable
orNone
- Do not generate ticks for the axis -
Time
- Generate ticks at logical points in time for axes representing absolute times -
Logarithmic
orLog
- Generate ticks at logarithmically advancing intervals (e.x. 0.1, 1, 10, 100, etc)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/TotalLevels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The total number of levels of ticks to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Digits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Decimal
-
- Description
-
The maximum number of significant digits to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The interval between ticks
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The origin around which ticks are generated
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/TimeFormat -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Time
-
- Description
-
The format string defining how times are displayed (e.x. YYYY-MM-DD)
- Type
- Undefined values
-
Set from user preferences
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Logarithmic
-
- Description
-
Logarithm base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The text displayed along the axis
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/ToolTipUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The units display in the tool tip
- Type
- Undefined values
-
Derived from the metadata
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The display units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Z (color) axis definitions with the key being used by the traces for binding
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/AlwaysShow -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Always show the axis, even if it has no data attached
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of line of the axis main baseline
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Draw -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable axis display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Gradient -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A gradient selection
- Type
- Structure
-
A gradient is an interpolator that converts values into a spectrum of colors. Several standard gradients are available, as well as a definition based on key colors. The type of gradient used is selected by the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/GroupUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The logical grouping units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Use logarithmic scaling
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Absolute upper bound, the maximum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Required upper bound, the maximum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Upper bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the upper bound by a fraction of the total range -
Fixed
- Set the axis to a constant upper bound -
ExtendAbsolute
- Extend the upper bound by a fixed constant value -
PowerRound
- Extend the upper bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the upper bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = Fixed
-
- Description
-
The upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendAbsolute
-
- Description
-
The value added from the base upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Absolute lower bound, the minimum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Required lower bound, the minimum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Lower bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the lower bound by a fraction of the total range -
Fixed
- Set the axis to a constant lower bound -
ExtendAbsolute
- Extend the lower bound by a fixed constant value -
PowerRound
- Extend the lower bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the lower bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = Fixed
-
- Description
-
The lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendAbsolute
-
- Description
-
The value subtracted from the base lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Reverse -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Reverse the axis direction
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The bar scaling factor, with negative values being the size in exact pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Side -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the axis is displayed on -
Top
- Locate the axis on the top of the graph -
Bottom
- Locate the axis on the bottom of the graph -
Left
- Locate the axis on the left of the graph -
Right
- Locate the axis on the right of the graph
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The sort priority of the axis, with lower priorities appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The settings for a level of ticks on the axis
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable tick label display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Enable tick display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/LineWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The width of line of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The size (distance from the baseline) of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Tick generation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Decimal
- Generate ticks based on logical decimal divisions -
Fixed
orConstant
- Generate ticks at fixed intervals around an origin -
CDF
orNormalCDF
- Generate ticks for normalized CDF standard deviation quantiles -
Allan
orTimeInterval
- Generate ticks at logarithmic logical time intervals for Allan plots -
Disable
orNone
- Do not generate ticks for the axis -
Time
- Generate ticks at logical points in time for axes representing absolute times -
Logarithmic
orLog
- Generate ticks at logarithmically advancing intervals (e.x. 0.1, 1, 10, 100, etc)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/TotalLevels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The total number of levels of ticks to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Digits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Decimal
-
- Description
-
The maximum number of significant digits to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The interval between ticks
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The origin around which ticks are generated
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/TimeFormat -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Time
-
- Description
-
The format string defining how times are displayed (e.x. YYYY-MM-DD)
- Type
- Undefined values
-
Set from user preferences
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Logarithmic
-
- Description
-
Logarithm base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The text displayed along the axis
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/ToolTipUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The units display in the tool tip
- Type
- Undefined values
-
Derived from the metadata
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = TimeSeries
-
- Description
-
The display units the axis is bound to
- Type
-
Flags, a set of unique text strings
Scatter Plot
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The traces in the plot
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The identifier of the X axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The identifier of the Y axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The identifier of the Z (color) axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Continuity -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The threshold to consider points contiguous
- Type
- Valid range
-
0.0 ≤ value
- Units
-
s
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The background fill mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Scan
orModelScan
- Evaluate the model for every pixel -
Grid
,Bilinear
, orBilinearGrid
- Grid points and fill with the bilinear interpolation between them -
ShadeBottom
,Bottom
, orShadeToBottom
- Extend the trace coloring to shade to the bottom of the graph -
ShadeTop
,ShadeToTop
, orTop
- Extend the trace coloring to shade to the top of the graph -
ShadeLeft
,Left
, orShadeToLeft
- Extend the trace coloring to shade to the left of the graph -
ShadeRight
,Right
, orShadeToRight
- Extend the trace coloring to shade to the right of the graph -
FitShadeBottom
,FitBottom
, orFitShadeToBottom
- Extend the fit coloring to shade to the bottom of the graph -
FitShadeLeft
,FitLeft
, orFitShadeToLeft
- Extend the fit coloring to shade to the left of the graph -
FitShadeRight
,FitRight
, orFitShadeToRight
- Extend the fit coloring to shade to the right of the graph -
FitShadeTop
,FitShadeToTop
, orFitTop
- Extend the fit coloring to shade to the top of the graph
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the X axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Y axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Z (color) axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/DisableZ -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Disable the Z (color) axis during fitting
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the X axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the Y axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the Z (color) axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fitting mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
X
,IndependentX
, orXIndependent
- Use the X dimension as the independent values -
Y
,IndependentY
, orYIndependent
- Use the Y dimension as the independent values -
I
,IIndependent
, orIndependentI
- Use a virtual "I" dimension as the independent value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/MaxI -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode = I
-
- Description
-
The maximum of the I dimension
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/MinI -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode = I
-
- Description
-
The minimum of the I dimension
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable connecting line display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the connecting line
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/SkipUndefined -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Skip undefined points, instead of breaking continuity
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Always display symbols at all points
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The scale factor of the symbol
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The size of the symbol
- Type
- Valid range
-
0.0 < value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The type of symbol
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
- Automatically select an unused symbol -
Circle
- A circle -
Square
- A square -
Diamond
- A diamond (45 degree rotated square) -
TriangleUp
orTriangle
- A triangle with a corner pointing upwards -
TriangleDown
- A triangle with a corner pointing downwards -
CircleCrossX
,CircleCross
, orCrossCircle
- A circle crossed with diagonal lines -
SquareCrossX
,CrossSquare
, orSquareCross
- A square crossed at the corners -
DiamondCrossPlus
,CrossDiamond
, orDiamondCross
- A diamond (45 degree rotated square) crossed at the corners -
TriangleUpCross
,CrossTriangle
,CrossTriangleUp
, orTriangleCross
- A triangle with a corner pointing upwards with crossing lines starting in each corner -
TriangleDownCross
orCrossTriangleDown
- A triangle with a corner pointing downwards with crossing lines starting in each corner -
CircleFilled
orFillCircle
- A circle with the entire area filled -
SquareFilled
orFillSquare
- A square with the entire area filled -
DiamondFilled
orFillDiamond
- A diamond (45 degree rotated square) with the entire area filled -
TriangleUpFilled
,filltriangle
,filltriangleup
, ortrianglefilled
- A triangle with a corner pointing upwards with the entire area filled -
TriangleDownFilled
orFillTriangleDown
- A triangle with a corner pointing downwards with the entire area filled -
X
orSimpleX
- Two diagonal crossing lines -
Plus
,+
, orSimplePlus
- Horizontal and vertical crossing lines -
CircleCrossPlus
orCrossCirclePlus
- A circle crossed with vertical lines -
DiamondCrossX
orCrossDiamondX
- A diamond (45 degree rotated square) crossed at the edges -
SquareCrossPlus
orCrossSquarePlus
- A square crossed at the edges -
TriangleLeft
- A triangle with a corner pointing left -
TriangleRight
- A triangle with a corner pointing right -
TriangleLeftCross
orCrossTriangleLeft
- A triangle with a corner pointing left with crossing lines starting in each corner -
TriangleRightCross
orCrossTriangleRight
- A triangle with a corner pointing right with crossing lines starting in each corner -
TriangleLeftFilled
orFillTriangleLeft
- A triangle with a corner pointing left with the entire area filled -
TriangleRightFilled
orFillTriangleRight
- A triangle with a corner pointing right with the entire area filled
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
X (horizontal) axis definitions with the key being used by the traces or binning for binding
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/AlwaysShow -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Always show the axis, even if it has no data attached
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Baseline/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Baseline/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Baseline/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of line of the axis main baseline
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Draw -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable axis display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Fixed -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fixed graph spanning line definitions
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Fixed/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Fixed/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Fixed/#0
/Position -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The position of the line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Fixed/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Fixed/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Grid -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The grid line definitions, for each tick level
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Grid/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Grid/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Grid/#0
/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable the grid level
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Grid/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Grid/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/GridEnable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable grid display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/GroupUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The logical grouping units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Absolute upper bound, the maximum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Required upper bound, the maximum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Upper bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the upper bound by a fraction of the total range -
Fixed
- Set the axis to a constant upper bound -
ExtendAbsolute
- Extend the upper bound by a fixed constant value -
PowerRound
- Extend the upper bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the upper bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Type = Fixed
-
- Description
-
The upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendAbsolute
-
- Description
-
The value added from the base upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Maximum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Absolute lower bound, the minimum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Required lower bound, the minimum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Lower bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the lower bound by a fraction of the total range -
Fixed
- Set the axis to a constant lower bound -
ExtendAbsolute
- Extend the lower bound by a fixed constant value -
PowerRound
- Extend the lower bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the lower bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Type = Fixed
-
- Description
-
The lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendAbsolute
-
- Description
-
The value subtracted from the base lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Minimum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Range/Reverse -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Reverse the axis direction
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Side -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the axis is displayed on -
Primary
,Bottom
, orLeft
- Locate the axis on the "primary" side for its direction (on the left or bottom) -
Secondary
,Right
, orTop
- Locate the axis on the "secondary" side for its direction (on the right or top)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The sort priority of the axis, with lower priorities appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The settings for a level of ticks on the axis
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable tick label display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable tick display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/LineWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of line of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The size (distance from the baseline) of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Tick generation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Decimal
- Generate ticks based on logical decimal divisions -
Fixed
orConstant
- Generate ticks at fixed intervals around an origin -
CDF
orNormalCDF
- Generate ticks for normalized CDF standard deviation quantiles -
Allan
orTimeInterval
- Generate ticks at logarithmic logical time intervals for Allan plots -
Disable
orNone
- Do not generate ticks for the axis -
Time
- Generate ticks at logical points in time for axes representing absolute times -
Logarithmic
orLog
- Generate ticks at logarithmically advancing intervals (e.x. 0.1, 1, 10, 100, etc)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/TotalLevels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The total number of levels of ticks to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Digits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Mode = Decimal
-
- Description
-
The maximum number of significant digits to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The interval between ticks
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The origin around which ticks are generated
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/TimeFormat -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Mode = Time
-
- Description
-
The format string defining how times are displayed (e.x. YYYY-MM-DD)
- Type
- Undefined values
-
Set from user preferences
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Ticks/Mode = Logarithmic
-
- Description
-
Logarithm base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Title/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The text displayed along the axis
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/ToolTipUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The units display in the tool tip
- Type
- Undefined values
-
Derived from the metadata
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XAxes/<IDENTIFIER>
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The display units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Bins with the binning definition along the X axis (vertically orientated box-whiskers)
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Axes/Dependent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The identifier of the dependent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Axes/Independent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The identifier of the independent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Binning definitions by dimension index
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Bin definition type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Uniform
orFixedCount
- A fixed number of uniformly sized bins covering the whole data range -
FixedSize
orSize
- A dynamic number of bins, each with a fixed size -
Cluster
orClustering
- Generate bins for clusters of points -
Static
- Static and fixed bin definitions
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
Perform the binning after normalizing to logarithmic (base 10, if applicable) coordinates
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Uniform
-
- Description
-
The total number of bins
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = FixedSize
-
- Description
-
The width of each bin
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Cluster
-
- Description
-
The maximum distance between points to form a cluster
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The definitions of each bin
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/Center -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The center of the bin as displayed
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/End -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The end (upper) bound of the bin
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/Start -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The start (lower) bound of the bin
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the box outline
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Histogram -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Generate boxes in histogram mode (e.x. lower edge always at zero)
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The box edge quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.25
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Box outline line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/DrawBoxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing any parts of the boxes
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fill/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fill/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable filling in the box
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the graph spanning middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/QuantileMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Quantile calculation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Standard
orQuantiles
- Calculate component quantiles as fixed fractions -
Normal
,Mean
, orMeanSD
- Calculate quantiles as multiplies of the standard deviation away from the mean
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Relocation -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Relocate boxes that overlap with others
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/CapWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Cap width as a fraction of the box width
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the whisker lines
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The whisker quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.05
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Whisker line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Box width scaling type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Constant
- Constant sized based on the median effective bin size -
Scale
- Dynamically sized by scaling the effective bin size -
FixedExact
- Exact size, specified in pixels -
Fixed
- Exact size, specified in real units
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Constant
-
- Description
-
The scale factor applied to the median bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Scale
-
- Description
-
The scale factor applied to the bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Fixed
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = FixedExact
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Y (vertical) axis definitions with the key being used by the traces or binning for binding
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/AlwaysShow -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Always show the axis, even if it has no data attached
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of line of the axis main baseline
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Draw -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable axis display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fixed graph spanning line definitions
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Position -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The position of the line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The grid line definitions, for each tick level
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable the grid level
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/GridEnable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable grid display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/GroupUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The logical grouping units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Absolute upper bound, the maximum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Required upper bound, the maximum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Upper bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the upper bound by a fraction of the total range -
Fixed
- Set the axis to a constant upper bound -
ExtendAbsolute
- Extend the upper bound by a fixed constant value -
PowerRound
- Extend the upper bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the upper bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = Fixed
-
- Description
-
The upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendAbsolute
-
- Description
-
The value added from the base upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Absolute lower bound, the minimum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Required lower bound, the minimum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Lower bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the lower bound by a fraction of the total range -
Fixed
- Set the axis to a constant lower bound -
ExtendAbsolute
- Extend the lower bound by a fixed constant value -
PowerRound
- Extend the lower bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the lower bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = Fixed
-
- Description
-
The lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendAbsolute
-
- Description
-
The value subtracted from the base lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Reverse -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Reverse the axis direction
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Side -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the axis is displayed on -
Primary
,Bottom
, orLeft
- Locate the axis on the "primary" side for its direction (on the left or bottom) -
Secondary
,Right
, orTop
- Locate the axis on the "secondary" side for its direction (on the right or top)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The sort priority of the axis, with lower priorities appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The settings for a level of ticks on the axis
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable tick label display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable tick display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/LineWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of line of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The size (distance from the baseline) of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Tick generation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Decimal
- Generate ticks based on logical decimal divisions -
Fixed
orConstant
- Generate ticks at fixed intervals around an origin -
CDF
orNormalCDF
- Generate ticks for normalized CDF standard deviation quantiles -
Allan
orTimeInterval
- Generate ticks at logarithmic logical time intervals for Allan plots -
Disable
orNone
- Do not generate ticks for the axis -
Time
- Generate ticks at logical points in time for axes representing absolute times -
Logarithmic
orLog
- Generate ticks at logarithmically advancing intervals (e.x. 0.1, 1, 10, 100, etc)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/TotalLevels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The total number of levels of ticks to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Digits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Decimal
-
- Description
-
The maximum number of significant digits to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The interval between ticks
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The origin around which ticks are generated
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/TimeFormat -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Time
-
- Description
-
The format string defining how times are displayed (e.x. YYYY-MM-DD)
- Type
- Undefined values
-
Set from user preferences
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Logarithmic
-
- Description
-
Logarithm base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The text displayed along the axis
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/ToolTipUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The units display in the tool tip
- Type
- Undefined values
-
Derived from the metadata
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The display units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Bins with the binning definition along the Y axis (horizontally orientated box-whiskers)
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Axes/Dependent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The identifier of the dependent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Axes/Independent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The identifier of the independent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Binning definitions by dimension index
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Bin definition type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Uniform
orFixedCount
- A fixed number of uniformly sized bins covering the whole data range -
FixedSize
orSize
- A dynamic number of bins, each with a fixed size -
Cluster
orClustering
- Generate bins for clusters of points -
Static
- Static and fixed bin definitions
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
Perform the binning after normalizing to logarithmic (base 10, if applicable) coordinates
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = Uniform
-
- Description
-
The total number of bins
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = FixedSize
-
- Description
-
The width of each bin
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = Cluster
-
- Description
-
The maximum distance between points to form a cluster
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Bins -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The definitions of each bin
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/Center -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The center of the bin as displayed
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/End -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The end (upper) bound of the bin
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Bins/#0
/Start -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Binning/#0
/Type = Static
-
- Description
-
The start (lower) bound of the bin
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Box/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Box/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the box outline
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Box/Histogram -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Generate boxes in histogram mode (e.x. lower edge always at zero)
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Box/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The box edge quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.25
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Box/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Box/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Box outline line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/DrawBoxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing any parts of the boxes
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fill/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fill/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable filling in the box
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lower/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Lowest/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Middle/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Upper/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Fit/Uppermost/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Middle/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Middle/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Middle/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/MiddleExtend/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/MiddleExtend/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/MiddleExtend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the graph spanning middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/MiddleExtend/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/MiddleExtend/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/QuantileMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Quantile calculation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Standard
orQuantiles
- Calculate component quantiles as fixed fractions -
Normal
,Mean
, orMeanSD
- Calculate quantiles as multiplies of the standard deviation away from the mean
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Relocation -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Relocate boxes that overlap with others
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Whisker/CapWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Cap width as a fraction of the box width
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Whisker/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Whisker/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable drawing the whisker lines
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Whisker/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The whisker quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.05
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Whisker/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Whisker/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Whisker line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Box width scaling type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Constant
- Constant sized based on the median effective bin size -
Scale
- Dynamically sized by scaling the effective bin size -
FixedExact
- Exact size, specified in pixels -
Fixed
- Exact size, specified in real units
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Type = Constant
-
- Description
-
The scale factor applied to the median bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Type = Scale
-
- Description
-
The scale factor applied to the bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Type = Fixed
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YBins/<IDENTIFIER>
/Width/Type = FixedExact
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Z (color) axis definitions with the key being used by the traces for binding
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/AlwaysShow -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Always show the axis, even if it has no data attached
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of line of the axis main baseline
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Draw -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable axis display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Gradient -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A gradient selection
- Type
- Structure
-
A gradient is an interpolator that converts values into a spectrum of colors. Several standard gradients are available, as well as a definition based on key colors. The type of gradient used is selected by the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/GroupUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The logical grouping units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Use logarithmic scaling
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Absolute upper bound, the maximum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Required upper bound, the maximum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Upper bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the upper bound by a fraction of the total range -
Fixed
- Set the axis to a constant upper bound -
ExtendAbsolute
- Extend the upper bound by a fixed constant value -
PowerRound
- Extend the upper bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the upper bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = Fixed
-
- Description
-
The upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendAbsolute
-
- Description
-
The value added from the base upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Absolute lower bound, the minimum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Required lower bound, the minimum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Lower bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the lower bound by a fraction of the total range -
Fixed
- Set the axis to a constant lower bound -
ExtendAbsolute
- Extend the lower bound by a fixed constant value -
PowerRound
- Extend the lower bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the lower bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = Fixed
-
- Description
-
The lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendAbsolute
-
- Description
-
The value subtracted from the base lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Reverse -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Reverse the axis direction
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The bar scaling factor, with negative values being the size in exact pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Side -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the axis is displayed on -
Top
- Locate the axis on the top of the graph -
Bottom
- Locate the axis on the bottom of the graph -
Left
- Locate the axis on the left of the graph -
Right
- Locate the axis on the right of the graph
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The sort priority of the axis, with lower priorities appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The settings for a level of ticks on the axis
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable tick label display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Enable tick display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/LineWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The width of line of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The size (distance from the baseline) of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Tick generation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Decimal
- Generate ticks based on logical decimal divisions -
Fixed
orConstant
- Generate ticks at fixed intervals around an origin -
CDF
orNormalCDF
- Generate ticks for normalized CDF standard deviation quantiles -
Allan
orTimeInterval
- Generate ticks at logarithmic logical time intervals for Allan plots -
Disable
orNone
- Do not generate ticks for the axis -
Time
- Generate ticks at logical points in time for axes representing absolute times -
Logarithmic
orLog
- Generate ticks at logarithmically advancing intervals (e.x. 0.1, 1, 10, 100, etc)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/TotalLevels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The total number of levels of ticks to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Digits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Decimal
-
- Description
-
The maximum number of significant digits to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The interval between ticks
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The origin around which ticks are generated
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/TimeFormat -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Time
-
- Description
-
The format string defining how times are displayed (e.x. YYYY-MM-DD)
- Type
- Undefined values
-
Set from user preferences
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Logarithmic
-
- Description
-
Logarithm base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The text displayed along the axis
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/ToolTipUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The units display in the tool tip
- Type
- Undefined values
-
Derived from the metadata
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Scatter
-
- Description
-
The display units the axis is bound to
- Type
-
Flags, a set of unique text strings
Cycle Plot
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Division -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The division interval of the cycle
- Type
- Structure
-
A time interval consists of a time unit, a number of units to apply, and an alignment setting.
- Undefined values
-
Derived from the interval
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Division/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A logical time unit
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Millisecond
orMilliseconds
-
Second
,Sec
,Seconds
,Secs
, ors
-
Minute
,Min
,Mins
,Minutes
,m
, ormi
-
Hour
,Hours
, orh
-
Day
,Days
, ord
-
Week
,Weeks
, orw
-
Month
,Mon
,Mons
,Months
, ormo
-
Quarter
,Qtr
,Qtrs
,Quarters
, orq
-
Year
,Years
, ory
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Division/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The number of units to apply in time
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Division/Align -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Align units in logical time
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The total interval or period of the cycle
- Type
- Structure
-
A time interval consists of a time unit, a number of units to apply, and an alignment setting.
- Undefined values
-
One year
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Interval/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A logical time unit
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Millisecond
orMilliseconds
-
Second
,Sec
,Seconds
,Secs
, ors
-
Minute
,Min
,Mins
,Minutes
,m
, ormi
-
Hour
,Hours
, orh
-
Day
,Days
, ord
-
Week
,Weeks
, orw
-
Month
,Mon
,Mons
,Months
, ormo
-
Quarter
,Qtr
,Qtrs
,Quarters
, orq
-
Year
,Years
, ory
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Interval/Count -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The number of units to apply in time
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Interval/Align -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Align units in logical time
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The traces in the plot
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The identifier of the X axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The identifier of the Y axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Axes/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The identifier of the Z (color) axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/BreakCycle -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Introduce a gap when the trace crosses the cycle boundary to prevent a line drawn back to the other side of the graph
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Continuity -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The threshold to consider points contiguous
- Type
- Valid range
-
0.0 ≤ value
- Units
-
s
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The background fill mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Scan
orModelScan
- Evaluate the model for every pixel -
Grid
,Bilinear
, orBilinearGrid
- Grid points and fill with the bilinear interpolation between them -
ShadeBottom
,Bottom
, orShadeToBottom
- Extend the trace coloring to shade to the bottom of the graph -
ShadeTop
,ShadeToTop
, orTop
- Extend the trace coloring to shade to the top of the graph -
ShadeLeft
,Left
, orShadeToLeft
- Extend the trace coloring to shade to the left of the graph -
ShadeRight
,Right
, orShadeToRight
- Extend the trace coloring to shade to the right of the graph -
FitShadeBottom
,FitBottom
, orFitShadeToBottom
- Extend the fit coloring to shade to the bottom of the graph -
FitShadeLeft
,FitLeft
, orFitShadeToLeft
- Extend the fit coloring to shade to the left of the graph -
FitShadeRight
,FitRight
, orFitShadeToRight
- Extend the fit coloring to shade to the right of the graph -
FitShadeTop
,FitShadeToTop
, orFitTop
- Extend the fit coloring to shade to the top of the graph
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the X axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Y axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Log/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
Use logarithmic scaling on the Z (color) axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fill/Mode = Scan
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/DisableZ -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Disable the Z (color) axis during fitting
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/X -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the X axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/Y -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the Y axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Log/Z -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the Z (color) axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fitting mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
X
,IndependentX
, orXIndependent
- Use the X dimension as the independent values -
Y
,IndependentY
, orYIndependent
- Use the Y dimension as the independent values -
I
,IIndependent
, orIndependentI
- Use a virtual "I" dimension as the independent value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/MaxI -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode = I
-
- Description
-
The maximum of the I dimension
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/MinI -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Fit/Mode = I
-
- Description
-
The minimum of the I dimension
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable connecting line display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the connecting line
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The origin of the points in the trace
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Start
- Draw points at the start time of the data value -
End
- Draw points at the end time of the data value -
Center
- Draw points at the central time of the data value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/SkipUndefined -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Skip undefined points, instead of breaking continuity
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Always display symbols at all points
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The scale factor of the symbol
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The size of the symbol
- Type
- Valid range
-
0.0 < value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Symbol/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The type of symbol
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
- Automatically select an unused symbol -
Circle
- A circle -
Square
- A square -
Diamond
- A diamond (45 degree rotated square) -
TriangleUp
orTriangle
- A triangle with a corner pointing upwards -
TriangleDown
- A triangle with a corner pointing downwards -
CircleCrossX
,CircleCross
, orCrossCircle
- A circle crossed with diagonal lines -
SquareCrossX
,CrossSquare
, orSquareCross
- A square crossed at the corners -
DiamondCrossPlus
,CrossDiamond
, orDiamondCross
- A diamond (45 degree rotated square) crossed at the corners -
TriangleUpCross
,CrossTriangle
,CrossTriangleUp
, orTriangleCross
- A triangle with a corner pointing upwards with crossing lines starting in each corner -
TriangleDownCross
orCrossTriangleDown
- A triangle with a corner pointing downwards with crossing lines starting in each corner -
CircleFilled
orFillCircle
- A circle with the entire area filled -
SquareFilled
orFillSquare
- A square with the entire area filled -
DiamondFilled
orFillDiamond
- A diamond (45 degree rotated square) with the entire area filled -
TriangleUpFilled
,filltriangle
,filltriangleup
, ortrianglefilled
- A triangle with a corner pointing upwards with the entire area filled -
TriangleDownFilled
orFillTriangleDown
- A triangle with a corner pointing downwards with the entire area filled -
X
orSimpleX
- Two diagonal crossing lines -
Plus
,+
, orSimplePlus
- Horizontal and vertical crossing lines -
CircleCrossPlus
orCrossCirclePlus
- A circle crossed with vertical lines -
DiamondCrossX
orCrossDiamondX
- A diamond (45 degree rotated square) crossed at the edges -
SquareCrossPlus
orCrossSquarePlus
- A square crossed at the edges -
TriangleLeft
- A triangle with a corner pointing left -
TriangleRight
- A triangle with a corner pointing right -
TriangleLeftCross
orCrossTriangleLeft
- A triangle with a corner pointing left with crossing lines starting in each corner -
TriangleRightCross
orCrossTriangleRight
- A triangle with a corner pointing right with crossing lines starting in each corner -
TriangleLeftFilled
orFillTriangleLeft
- A triangle with a corner pointing left with the entire area filled -
TriangleRightFilled
orFillTriangleRight
- A triangle with a corner pointing right with the entire area filled
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Traces/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Bins with the binning definition along the X axis (vertically orientated box-whiskers)
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Axes/Dependent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The identifier of the dependent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Axes/Independent -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The identifier of the independent axis to bind to
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/ExtendAllMiddles -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable the center line extension for all bins, instead of only for total bins if center line extension is enabled
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Generate bins on each cycle interval at the division ticks
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/TotalAfter -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Generate a total bin after (right of) the main cycle
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Binning/TotalBefore -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Generate a total bin before (left of) the main cycle
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable drawing the box outline
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Histogram -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Generate boxes in histogram mode (e.x. lower edge always at zero)
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The box edge quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.25
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Box/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Box outline line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/DrawBoxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable drawing any parts of the boxes
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fill/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fill/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable filling in the box
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lower/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Lowest/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Middle/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Upper/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fit legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Line/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Line/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the fit line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Log/D -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the dependent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Log/I -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling on the independent axis
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Fit/Uppermost/Model -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose interpolation model definition
- Type
- Structure
-
A definition of a model used for interpolation. Interpolation models are used to generate interpolations or fits of some sequence of input. For example, a linear regression and a cubic spline interpolator are both available. The the type of model is set with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable legend entries
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The sort priority in the legend, with smaller values appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Legend/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The legend entry text
- Type
- Undefined values
-
Automatic
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable drawing the middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Middle/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable drawing the graph spanning middle line
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/MiddleExtend/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Middle line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/QuantileMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Quantile calculation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Standard
orQuantiles
- Calculate component quantiles as fixed fractions -
Normal
,Mean
, orMeanSD
- Calculate quantiles as multiplies of the standard deviation away from the mean
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Relocation -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Relocate boxes that overlap with others
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Transformer -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A general purpose data value transformer definition
- Type
- Structure
-
A data transformer is a general construct that applies an transformation function to some sequence of points. Examples include data filtering (removing points) and converting data into various probability distribution functions. The conversion type is selected with the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/TransformerMode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Transformer input mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Simple
,Values
, orValuesOnly
- Only pass data values to the transformer -
Start
,StartThenValues
, orWithStart
- Pass the start epoch time then the value for each point -
End
,EndThenValues
, orWithEnd
- Pass the end epoch time then the value for each point -
Middle
,MiddleThenValues
, orWithMiddle
- Pass the center epoch time then the value for each point -
StartEnd
,StartEndThenValues
, orWithStartAndEnd
- Pass the start and end epoch time then the value for each point
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/CapWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Cap width as a fraction of the box width
- Type
- Valid range
-
0.0 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable drawing the whisker lines
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Quantile -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The whisker quantile
- Type
- Valid range
-
0.0 ≤ value ≤ 0.5
- Undefined values
-
0.05
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Whisker/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Whisker line width
- Type
- Valid range
-
0.0 ≤ value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Box width scaling type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Constant
- Constant sized based on the median effective bin size -
Scale
- Dynamically sized by scaling the effective bin size -
FixedExact
- Exact size, specified in pixels -
Fixed
- Exact size, specified in real units
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Constant
-
- Description
-
The scale factor applied to the median bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Scale
-
- Description
-
The scale factor applied to the bin width to generate the displayed width
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = Fixed
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Excluding conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/XBins/<IDENTIFIER>
/Width/Type = FixedExact
-
- Description
-
The bin width, in real axis units
- Type
- Valid range
-
0.0 < value
- Units
-
pixels
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Y (vertical) axis definitions with the key being used by the traces or binning for binding
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/AlwaysShow -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Always show the axis, even if it has no data attached
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Baseline/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of line of the axis main baseline
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Draw -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable axis display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The fixed graph spanning line definitions
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Position -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The position of the line
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Fixed/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The grid line definitions, for each tick level
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable the grid level
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Grid/#0
/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of the line drawn
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/GridEnable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable grid display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/GroupUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The logical grouping units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Absolute upper bound, the maximum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Required upper bound, the maximum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Upper bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the upper bound by a fraction of the total range -
Fixed
- Set the axis to a constant upper bound -
ExtendAbsolute
- Extend the upper bound by a fixed constant value -
PowerRound
- Extend the upper bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the upper bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = Fixed
-
- Description
-
The upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendAbsolute
-
- Description
-
The value added from the base upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Maximum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Absolute lower bound, the minimum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Required lower bound, the minimum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Lower bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the lower bound by a fraction of the total range -
Fixed
- Set the axis to a constant lower bound -
ExtendAbsolute
- Extend the lower bound by a fixed constant value -
PowerRound
- Extend the lower bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the lower bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = Fixed
-
- Description
-
The lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendAbsolute
-
- Description
-
The value subtracted from the base lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Minimum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Range/Reverse -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Reverse the axis direction
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Side -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the axis is displayed on -
Primary
,Bottom
, orLeft
- Locate the axis on the "primary" side for its direction (on the left or bottom) -
Secondary
,Right
, orTop
- Locate the axis on the "secondary" side for its direction (on the right or top)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The sort priority of the axis, with lower priorities appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The settings for a level of ticks on the axis
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable tick label display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable tick display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/LineWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of line of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The size (distance from the baseline) of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Tick generation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Decimal
- Generate ticks based on logical decimal divisions -
Fixed
orConstant
- Generate ticks at fixed intervals around an origin -
CDF
orNormalCDF
- Generate ticks for normalized CDF standard deviation quantiles -
Allan
orTimeInterval
- Generate ticks at logarithmic logical time intervals for Allan plots -
Disable
orNone
- Do not generate ticks for the axis -
Time
- Generate ticks at logical points in time for axes representing absolute times -
Logarithmic
orLog
- Generate ticks at logarithmically advancing intervals (e.x. 0.1, 1, 10, 100, etc)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/TotalLevels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The total number of levels of ticks to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Digits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Decimal
-
- Description
-
The maximum number of significant digits to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The interval between ticks
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The origin around which ticks are generated
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/TimeFormat -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Time
-
- Description
-
The format string defining how times are displayed (e.x. YYYY-MM-DD)
- Type
- Undefined values
-
Set from user preferences
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Ticks/Mode = Logarithmic
-
- Description
-
Logarithm base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Title/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The text displayed along the axis
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/ToolTipUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The units display in the tool tip
- Type
- Undefined values
-
Derived from the metadata
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/YAxes/<IDENTIFIER>
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The display units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Z (color) axis definitions with the key being used by the traces for binding
- Keys
-
The keys immediately below this are unique names selected by the user. These names can be any non-empty text and are generally used to designate different components to be configured. In the paths listed
<IDENTIFIER>
is used as a placeholder to real name selected during configuration.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/AlwaysShow -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Always show the axis, even if it has no data attached
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Baseline/Width -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of line of the axis main baseline
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Draw -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable axis display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Gradient -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A gradient selection
- Type
- Structure
-
A gradient is an interpolator that converts values into a spectrum of colors. Several standard gradients are available, as well as a definition based on key colors. The type of gradient used is selected by the
Type
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/GroupUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The logical grouping units the axis is bound to
- Type
-
Flags, a set of unique text strings
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Log -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Use logarithmic scaling
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Absolute upper bound, the maximum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Required upper bound, the maximum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Upper bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the upper bound by a fraction of the total range -
Fixed
- Set the axis to a constant upper bound -
ExtendAbsolute
- Extend the upper bound by a fixed constant value -
PowerRound
- Extend the upper bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the upper bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the upper bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = Fixed
-
- Description
-
The upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = ExtendAbsolute
-
- Description
-
The value added from the base upper bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Maximum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Absolute -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Absolute lower bound, the minimum will never be below this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Required -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Required lower bound, the minimum will never be above this
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Lower bound mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
ExtendFraction
- Extend the lower bound by a fraction of the total range -
Fixed
- Set the axis to a constant lower bound -
ExtendAbsolute
- Extend the lower bound by a fixed constant value -
PowerRound
- Extend the lower bound so that it aligns with the next smallest power (usually for logarithmic alignment)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/AtLeast -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The minimum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/AtMost -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The maximum amount of extension applied to the lower bound
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Fraction -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendFraction
-
- Description
-
The fraction of the base range to extend the lower bound by
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Value -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = Fixed
-
- Description
-
The lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = ExtendAbsolute
-
- Description
-
The value subtracted from the base lower bound
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Base -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Minimum/Type = PowerRound
-
- Description
-
The power alignment base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Range/Reverse -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Reverse the axis direction
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Scale -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The bar scaling factor, with negative values being the size in exact pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Side -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Side binding mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Automatic
orAuto
- Automatically select the side of the graph that the axis is displayed on -
Top
- Locate the axis on the top of the graph -
Bottom
- Locate the axis on the bottom of the graph -
Left
- Locate the axis on the left of the graph -
Right
- Locate the axis on the right of the graph
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/SortPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The sort priority of the axis, with lower priorities appearing first
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The settings for a level of ticks on the axis
- Keys
-
The keys immediately below this are array indices. These are indexes into an ordered list, with the first element being zero. For example,
#0
is the first element of the array. The paths represented here use#0
as a placeholder for all indices.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable tick label display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Label/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/DrawPriority -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Draw priority ordering, lower numbers are drawn first (below)
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Enable -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Enable tick display
- Type
-
Boolean, values are
TRUE
orFALSE
and defaults toFALSE
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/LineWidth -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The width of line of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Size -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The size (distance from the baseline) of the tick mark
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Levels/#0
/Mark/Style -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Line draw style
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Solid
- A solid line, with no special style -
Dash
- A dashed line -
Dot
- A dotted line -
DashDot
- A line consisting of alternating dashes and dots -
DashDotDot
orDotDotDash
- A line consisting of alternating a dash and two dots
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Tick generation mode
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Decimal
- Generate ticks based on logical decimal divisions -
Fixed
orConstant
- Generate ticks at fixed intervals around an origin -
CDF
orNormalCDF
- Generate ticks for normalized CDF standard deviation quantiles -
Allan
orTimeInterval
- Generate ticks at logarithmic logical time intervals for Allan plots -
Disable
orNone
- Do not generate ticks for the axis -
Time
- Generate ticks at logical points in time for axes representing absolute times -
Logarithmic
orLog
- Generate ticks at logarithmically advancing intervals (e.x. 0.1, 1, 10, 100, etc)
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/TotalLevels -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The total number of levels of ticks to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Digits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Decimal
-
- Description
-
The maximum number of significant digits to display
- Type
- Valid range
-
1 ≤ value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The interval between ticks
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Origin -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Fixed
-
- Description
-
The origin around which ticks are generated
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/TimeFormat -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Time
-
- Description
-
The format string defining how times are displayed (e.x. YYYY-MM-DD)
- Type
- Undefined values
-
Set from user preferences
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Interval -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle -
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Ticks/Mode = Logarithmic
-
- Description
-
Logarithm base
- Type
- Valid range
-
1.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Color -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
A color selection
- Type
- Structure
-
A color as displayed on the screen or in an image. Colors are determined by their channel values, each ranging from zero to one, inclusive. For example, black has all components zero, except alpha (transparency) which is one. The color model in use is determined by the
Model
enumeration key.
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Family -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font family name
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Flags -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font flags
- Type
-
Flags, a set of unique text strings
- Acceptable Flags
-
Bold Bold font face
FixedPitch Fixed pitch
Italic Italic font face
NoKerning Request no kerning
Overline Overline enabled
StrikeOut Strike out enabled
Underline Underline enabled
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Amount -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The spacing applied to the font
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/LetterSpacing/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font letter spacing type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Percentage
- Change the letter spacing based on a percentage of the font’s normal definition -
Absolute
- Set the letter spacing to an absolute exact value
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Size/Number -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The font size
- Type
- Valid range
-
0.0 < value
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Size/Type -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font size selection type
- Type
- Values
-
This is an enumeration value. It accepts a single string (not case sensitive) from a list of possible choices. Possible values:
-
Point
- Set the font size by logical points -
Pixel
- Set the font size by absolute pixels
-
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Stretch -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font stretch factor
- Type
- Valid range
-
1 ≤ value ≤ 4000
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/Weight -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Font weight factor
- Type
- Valid range
-
0 ≤ value ≤ 99
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Font/WordSpacing -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
Additional word spacing in pixels
- Type
- Undefined values
-
Not permitted
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Title/Text -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The text displayed along the axis
- Type
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/ToolTipUnits -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The units display in the tool tip
- Type
- Undefined values
-
Derived from the metadata
- /Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/ZAxes/<IDENTIFIER>
/Units -
- Required conditions
-
-
/Profiles/
<PROFILE>
/<IDENTIFIER>
/Displays/<IDENTIFIER>
/Layout/<NUMBER>
/Type = Cycle
-
- Description
-
The display units the axis is bound to
- Type
-
Flags, a set of unique text strings